Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Poly in nooks and crannies?

Featured Replies

I am close to the finishing phase of my first indoor piece. Two questions about applying poly, I'm sure they're stupid but I can't find the definitive answers.

is it easier to apply a side at a time by rotating the piece so that the poly is always being applied on top and has a better chance to be level? All of the instructional videos I've seen just shows them doing one flat piece , not sides

 

i have some sharp angles and stuff in the piece that I imagine will be interesting to apply poly to. Is poly intended for the entire visible area or maybe just for the tops of things? I did see a post that confirms applying poly underneath a top is unnecessary but this doesn't fully answer this question

Pre-finishing before assembly is best whenever possible for that very reason.  Thin coats and a methodical approach are the best you can do now.  If you're applying full strength poly out of the can...god be with you.

You can use poly on any surface you want, just be aware that any inside parts like drawers will take weeks to off-gas and stop stinking.

  • Author
5 minutes ago, Eric. said:

Pre-finishing before assembly is best whenever possible for that very reason.  Thin coats and a methodical approach are the best you can do now.  If you're applying full strength poly out of the can...god be with you.

You can use poly on any surface you want, just be aware that any inside parts like drawers will takes weeks to off-gas and stop stinking.

Thanks, so use mineral spirits to thin it and wipe on with cloth on the tough areas? 

That's what I'd do.  Use an old t-shirt, folded neatly.  Don't make it too thick or you won't be able to get into the corners.  Be vigilant about wiping away drips.  Light coats.

Or you can use a pre-diluted poly like Minwax Wipe-On poly or Arm-R-Seal.  Same application but easier to use, IMO.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.