Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Little picnic table

Featured Replies

I recently started and am almost finished with a small picnic table for my little one. It was one I picked up free from craigslist that was falling apart and had graying wood due to weathering. I supposed it's a reclaimed wood project. We have taken it apart, sanded, rounded over the edges, chamfered the ends, drilled pocket holes, stained and are beginning reassembly. In hindsight I probably could have almost bought new wood, but...it's about the journey and shop time with my little one right? :) I'm posting it only as inspiration for spending time with our little ones because it's definitely not an example of great woodworking. My daughter is 3 years old and been helping me work on her 'new' little picnic table. She tells complete strangers how she "loves" her new table. Shop time can be frustrating with a 3 year old running around and learning safety, but the joys far outweigh the headaches. She sees tools in the store and either knows what they are or 'wants' one. Makes me smile deep down.

Wood - a few bucks to drive and get it.

New bolts/nuts/washers - a few bucks

Hearing my daughter tell people about her table while beaming - priceless

You may notice the hole in the middle of the table top for an umbrella. A few years back I built a 4x8 sandbox for my daughter. I provided 6 holes for an umbrella since we have 3 so we can adjust where the shade is over the box to avoid little one getting a sun burn. My wife asked if I could do a similar concept on the table. I didn't want to make the table ugly with a lot of holes in the top so I made the slide out blocks you can see in one of the pics. I am going to mount them under the table top on the ends and surprise my wife when I get the table home from the shop. We will have the flexibility to put the umbrellas in multiple positions without the ugly. I think when it needs stain in a few years I am also going to putty the old nail holes on the top. I wish I had done that before staining this time too.

post-3726-0-37437000-1300798518_thumb.jp

post-3726-0-05832300-1300798520_thumb.jp

post-3726-0-64525400-1300798521_thumb.jp

I recently started and am almost finished with a small picnic table for my little one. It was one I picked up free from craigslist that was falling apart and had graying wood due to weathering. I supposed it's a reclaimed wood project. We have taken it apart, sanded, rounded over the edges, chamfered the ends, drilled pocket holes, stained and are beginning reassembly. In hindsight I probably could have almost bought new wood, but...it's about the journey and shop time with my little one right? :) I'm posting it only as inspiration for spending time with our little ones because it's definitely not an example of great woodworking. My daughter is 3 years old and been helping me work on her 'new' little picnic table. She tells complete strangers how she "loves" her new table. Shop time can be frustrating with a 3 year old running around and learning safety, but the joys far outweigh the headaches. She sees tools in the store and either knows what they are or 'wants' one. Makes me smile deep down.

Wood - a few bucks to drive and get it.

New bolts/nuts/washers - a few bucks

Hearing my daughter tell people about her table while beaming - priceless

You may notice the hole in the middle of the table top for an umbrella. A few years back I built a 4x8 sandbox for my daughter. I provided 6 holes for an umbrella since we have 3 so we can adjust where the shade is over the box to avoid little one getting a sun burn. My wife asked if I could do a similar concept on the table. I didn't want to make the table ugly with a lot of holes in the top so I made the slide out blocks you can see in one of the pics. I am going to mount them under the table top on the ends and surprise my wife when I get the table home from the shop. We will have the flexibility to put the umbrellas in multiple positions without the ugly. I think when it needs stain in a few years I am also going to putty the old nail holes on the top. I wish I had done that before staining this time too.

My only comment is I hope you are going to trim the bolts and smooth them with a file.

  • Author

My only comment is I hope you are going to trim the bolts and smooth them with a file.

That's actually on my to do list!

  • Author

Done! 1 and 2 show the typical umbrella. 3 shows the slide out umbrella holder blocks in use.

post-3726-0-87120600-1300977341_thumb.jp

post-3726-0-61044600-1300977345_thumb.jp

post-3726-0-90407000-1300977348_thumb.jp

Done! 1 and 2 show the typical umbrella. 3 shows the slide out umbrella holder blocks in use.

Don't you just love happy ladies. Tell your little lady I love the boots, and the table ain't half bad either.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.