Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leigh D4R-PRO Dovetail Jig Questions

Featured Replies

  • Popular Post

I have two questions about the Leigh D4R-PRO Dovetail Jig.

1) The kit comes with a special bushing and lock ring.  I Stick the bushing through the base of my router and screw the lock ring on hand tight.  When using the jig, the vibrations cause the lock ring to loosen.  The bushing is held between the jig and the router base, so it's not dangerous.  But, I have to believe that it's not supposed to unscrew like that.

I have the Milescraft Omnibase on all my routers so that I can swap extended bases and guides between them.  The Omnibase has a bushing adapter.  This is the first time I've used a bushing, so it's probably user error.

2) The pin side of the fingers have an angled section and a parallel section (see photos).  When cutting the pins in 3/4" stock, the router bushing transitions between the angled and parallel sections.  If I move the fingers all the way back so that the tip of the fingers is level with the edge of the stock, then the router still hits the bump between the sections, and also the joint is very loose.  

I don't understand how to cut pins in thick board when the angled section of the fingers is only about 3/4" deep.

I'm sure this is just learning curve stuff, but I'd appreciate any guidance.

 

Dovetail 1.jpg

Dovetail 2.jpg

Dovetail 3.jpg

  • Popular Post

@Beechwood Chip - I swear practically every time I use my jig I have to re-watch the video.  I do have dedicated routers setup but I often need a reminder on the board orientation. BTDT.  I feel ya.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.