Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Few of questions on Mylands Friction Polish

Featured Replies

I just have a few of questions that I can't seem to find a proper answer on regarding Mylands Friction Polish....

Do I need to use the sanding sealer or is sanding to 600+ good enough?

Once you get some heat going and it get a nice shine (working on the lathe, obviously), am I done? Do I need to let it dry?

Do I want to apply multiple coats?

Is this a sturdy finish?

Is this something one might want to apply on top of a CA + BLO finish?

Next, I have been reading about using the Bealle buffing system after the polish. What is the point of this?

I have also read to apply Renaissance Wax. I like the renaissance way for it's fingerprint resistance. With that said, I wonder if I apply it correctly...after I apply some to the surface, should I let it dry for any period of time like I might do for a paste wax?

Any help here would be greatly appreciated.

Thanks in advance.

With Ren wax, yes you want it to set up for 2-5 minutes before buffing off. for the Beall Buffing system, I would suggest going to their web site and watch the video on it.

600 grit is plenty enough

after you've buffed it in, you're done.

multiple coats, depends on the appearance you're trying to achieve. I usually do two coats because it doesn't take hardly any time and the sheen is nice.

sturdy? depends what you're trying to do with it...repels a little water, won't sustain submersion or cleaning chemicals but very good for general handling.

on top of CA+BLO... Not necessary. I like the friction polish right on top of bare wood.

Bealle..It is for achieving a high luster on the piece by going through several grit levels of polish.

I don't use Renaissance wax so I can't help you there sorry :(

  • Author

I have the beall system, and I really like it on bare wood. I guess I don't really understand what good it is doing on top of a polished layer.

I read that some people don't think a friction polish is good for piece that will be handled (like a pen) while other say no problem.

I guess, at the end of the day, that is just the thing about finishing....everyone has an opinion and you just have to find your way.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.