Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What about a tool tray off the back of the bench?

Featured Replies

Hi,

I'm thinking of doing a modification of adding a tool tray off the back of the bench. I'm thinking of making the bottom of the tool tray removable so that I can use it for clamping if needed.

I was wondering if anyone had any thoughts on this idea.

Andy

I have worked with tool trays and without - my personal preference is without. For me they are a 'trap' for all manner of stuff and with me the tendency was for really sharp tools to pile up on each other - never a good idea. However - having said that I am going to build the split Roubo with the centre reversable gap-stop - sort of a hybrid tool tray.

Gook luck with your build!!

I agree with Spokeshave that tool trays can be more of a pain than a pleasure in my experience. I also will be building with the gap stop, but I'm thinking about going with 2-3 separate stops which I can reverse as needed. This way, I can have a planing stop and the tools that I will need at hand.

I have worked with tool trays and without - my personal preference is without. For me they are a 'trap' for all manner of stuff and with me the tendency was for really sharp tools to pile up on each other - never a good idea. However - having said that I am going to build the split Roubo with the centre reversable gap-stop - sort of a hybrid tool tray.

Gook luck with your build!!

I agree with Spokeshave that tool trays can be more of a pain than a pleasure in my experience. I also will be building with the gap stop, but I'm thinking about going with 2-3 separate stops which I can reverse as needed. This way, I can have a planing stop and the tools that I will need at hand.

Your ideas remind me of Robert (Bob) Lang’s 21st Century Workbench. The center "Tool" trays can be removed and clamps can be attached in the center section, or you can invert the trays to give a flush surface all the way across to work with.

post-302-0-51997400-1325823605_thumb.jpg

This is how I arranged my tool tray on my joinery bench. I agree with much of the "do without" sentiment above as the tray captures all kinds of stuff on purpose and by accident. However for the joinery bench, I don't do any heavy planing so it doesn't fill up with chips and shavings. My design allow for the bottom to just float on the leg supports so I can remove it for clamping as well as in case of expansion of the top. If interested you can check out the finished bench on my blog

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.