Jjmedure Posted February 7, 2012 Report Share Posted February 7, 2012 Can I spray polyacrylic water based top coat? (null) Quote Link to comment Share on other sites More sharing options...
dwacker Posted February 7, 2012 Report Share Posted February 7, 2012 Yes. Quote Link to comment Share on other sites More sharing options...
PaulMarcel Posted February 7, 2012 Report Share Posted February 7, 2012 Yes, that's one I spray often. Quote Link to comment Share on other sites More sharing options...
Jjmedure Posted February 8, 2012 Author Report Share Posted February 8, 2012 I played with it for a while tonight, I ordered some product and they sent the wrong stuff so I decided to try it anyway. I had really great result, I did one gloss for that mirror like finish plus I had a great piece of pore filled walnut. Then I did one finish with satan for that close to the wood finish and they both turned out really great. For the gloss I did 4 wet coates sanding 600,600,1000,4000 buff pad. It really worked out well. For the Satan I did 6 misting coates and sanded the same. Also worked great really a nice soft finish. I tried to post this original post yesterday but must not of sent it ( I was wondering why no replies ). I never finished wood with spraying but I sprayed metal a lot in the past, followed the same practices and it did the job. Thanks for all the feedback on this forum, it's really great!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.