Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

veritas bevel up jointer plane (with fence)

Featured Replies

I have a need to edge joint some long boards (8-13 feet). My jointer is not battle-ship size, and cannot comfortably edge joint long (over 8 feet) sections of hardwood. I thought I would see if anyone has any experience with this hand plane. I have other veritas planes, and am very happy with them (no bevel ups though).

Anybody own one of these? Is it worth getting this unit? It's over 300 dollars with the fence (CDN).

http://www.leevalley.com/en/wood/page.aspx?p=52414&cat=1,41182,48944,52414

I have and can definitely recommend the LV Bevel-up jointer. I don't have the fence, but that hasn't ever been an issue for me. Check your work often and don't take too heavy of a cut and I bet you can get along fine without it as well.

I have that jointer and like it a lot. I also bought the fence, but rarely use it.

Since you eluded to a jointer, I assume you have a hybrid workshop. If that's the case, you could edge joint those boards on a table saw. Take a piece of MDF or ply that has a straight edge on it and screw it into your boards (so at the very tip; you could carpet-tape it on, too). Put that straight edge against your fence and cut the other edge straight. You can then make the parallel cut and just use your existing hand planes to take off the milling marks. That's effectively how I edge joint though I make the first cut with a tracksaw.

Do you need to edge joint these boards for a glue up, or are you edge jointing them just to get them square? If you're gluing them up, you'll need a higher degree of accuracy than you will if you just want to make the edge look nice. In either case, if you have a long straightedge you can get a surprisingly accurate result by planing with any plane and spot-checking your edge with the straightedge.

Also, if you're talking about a power jointer, as Paul mentioned, you can joint very long boards if you rig up additional infeed and outfeed support, and/or get someone to help you. My powered jointer is a 10" jointer/planer combo machine, with a bed that's "only" 40" long, and I was able to joint the 8 foot long boards for my workbench top with it by having my neighbor come over and help with feeding the boards across it.

Having said all that, the Veritas BU jointer is a really nice plane. I like bevel down planes myself, and so my jointer plane is a #7.

Love my jointer plane from LV. In fact, after my bu jack, it is my absolute go-to user.

  • Author

Also, if you're talking about a power jointer, as Paul mentioned, you can joint very long boards if you rig up additional infeed and outfeed support, and/or get someone to help you. My powered jointer is a 10" jointer/planer combo machine, with a bed that's "only" 40" long, and I was able to joint the 8 foot long boards for my workbench top with it by having my neighbor come over and help with feeding the boards across it.

Thanks for the suggestion.

I have tried this approach in the past, but find it frustrating. I often find that I have a difficult time getting a good edge without wasting a lot of wood using this technique.

  • Author

Love my jointer plane from LV. In fact, after my bu jack, it is my absolute go-to user.

How does it perform as a panel flattener?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.