nikbrown Posted April 10, 2012 Report Posted April 10, 2012 Recently a lot of the cherry I’ve been working with has had a lot of curl and figure to it. As much as I love my Stanley Type 2 #604 the 45° bedding angle just isn’t steep enough to handle highly figured hardwoods. I wasn’t quite ready to drop a couple hundred $ on a new plane. A few years ago I bought one of the Hock Tools blades with the plan of eventually making a small infill plane. Allas, the blade had just been gathering dust on a shelf next to the stack of steel and brass. Having also developed an interest in Japanese style planes over the last few months I decided to make a high-angle pull plane with my Hock blade. True Japanese planes have a tapered blade that wedges itself into the body (Dai) due to a matching taper cut into it. (if you want to see the process that goes into cutting a Dai this page over on daikudojo.org has a nice photogallery ). The hybrid plane I made may look somewhat like a Japanese plane, but it’s construction technique is based on Krenov Style plane making. I made my high angle smoother out of quarter-sawn Wenge because I had it around, it’s DENSE, and I thought it would look cool I have a bunch more pics of the process over at my website if anyone is interested.http://digitalwoodworker.com/2012/04/10/making-a-hybrid-high-angle-plane-for-figured-woods/ Quote
nikbrown Posted April 10, 2012 Author Report Posted April 10, 2012 It takes ridiculously thin wispy shavings and leaves an amazing surface on very highly figured maple & cherry. 0 Tear out! I'm impressed with it! I should have done this long ago! Quote
Vic Posted April 10, 2012 Report Posted April 10, 2012 Nice! What width blade did you use? I have a Hock for My No. 8 Stanley jointer. I don't really need to put that into service. (null) Quote
nikbrown Posted April 10, 2012 Author Report Posted April 10, 2012 I have a number of hock blades that I use in all my bedrocks! they are amazing. This is one of the Hock Krenov blades. http://hocktools.com/PI.htm They are 3/16" thick!!! I used the 1¾ x 3½" #PI175. I should get one of the 2" wide ones and make another on bedded at around 48* for general smoothing work. Quote
Vic Posted April 11, 2012 Report Posted April 11, 2012 I think the No 8 blade is 2 3/8". You think that's be too wide for a high angle? (null) Quote
nikbrown Posted April 11, 2012 Author Report Posted April 11, 2012 It may be a little harder to push at that steep angle but it should be fine. I would make sure to get a Hock Cap Iron as well!! Those Hock Stanley replacement blades are only 3/32" thick. I think you would have problems with chatter if you dont put a good thick cap iron on it as well. Quote
Vic Posted April 11, 2012 Report Posted April 11, 2012 Yea, I bought a bunch when I made my first purchase. (null) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.