Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Danish oil over-application fix?

Featured Replies

Yesterday, I applied some Danish oil (Watco "Natural") to some pieces, including both pine and some hardwoods. The instructions said to apply one coat, wait 30 minutes, apply another coat, wait 15 minutes, then wipe off the excess.

Well...I neglected to entirely follow the last of those instructions, and today, I found basically these sticky patches of apparently half dried, unabsorbed oil. I tried to wipe those up, but all I accomplished was to scuff-up those areas and get lint into the sticky stuff! :-(

What's my best bet for a fix? Remove the excess with mineral spirits, perhaps? Or wait several days until everything dries, then steel-wool the surfaces until they're smooth again? And then what, more oil (I suppose not), or leave well-enough alone?

For what it's worth, I'd like to apply polyurethane (probably wipe-on poly) as a final, hard finish.

Thanks, and sorry if this question has been asked here before!

Use naphtha on a clean rag instead. Give it a wipe, don't molest the surface by scrubbing. The naphtha will open up the finish to aid the dry. Then let it dry a for few days. Once dry, smooth with 320 sand paper. Clean your surface of dust, reapply the Danish Oil.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.