ngabriel Posted May 4, 2012 Report Posted May 4, 2012 Just curious if anyone here has any advice on shipping small to medium sized projects cross-country. I know there's a lot consider in terms of environment and wood-movement. For now though, I'm mostly thinking about cost and care of handling. Other things I just can’t really control. I have small cabinet (4' x 2' x 6") that I'd like to ship (about 1600 miles). The weight is not considerable (likely <20lbs). Ideally the cost of shipping wont exceed what I paid for the material to build it. The cabinet has a door with a piece of glass in it. I have tons of very sturdy packing foam/material that could wrap the whole thing in. Enough to protect against any reasonable amount of abuse. I suppose I could do a bit better by placing another piece of scrap plywood over the door/glass (backside is already protected by plywood), though I don't know if this is overkill or how it would affect the cost. Given the project, I think crating is definitely overkill. Anyone have good/bad luck with the standard carriers (Fedex, USPS, UPS, DHL, etc …) Just looking for opinions/wisdom. Thanks Quote
duckkisser Posted May 4, 2012 Report Posted May 4, 2012 havent sold stuff long distance yet but i would put your project wood inside before you build it and give it a week or two to move. then build it, that way when it gets to the location that you are sending it to ( most place are air conditioned the wood will move to the location that it was stored in while in air conditioned. at least that my thought if that actuly maters i dont realy know. Quote
Tom Crawford Posted May 4, 2012 Report Posted May 4, 2012 There is probably a UPS store in Austin. I would go down there and talk to them. They might even package it for you for a fee. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.