rjhidaho Posted May 5, 2012 Report Posted May 5, 2012 Just about to begin assembly of my new Unisaw. I am going to place it on a mobile base. Is there an easy way for one person to place the saw on the mobile base, or should I call out the troops to lift and place the saw on the mobile base. rjh Quote
fransikaner Posted May 5, 2012 Report Posted May 5, 2012 I did a similar operation years ago. If you have some plywood scraps and 2x4's you should be able to slip it in place. Quote
CessnaPilotBarry Posted May 5, 2012 Report Posted May 5, 2012 I used ramps and some ratchet straps attached to the ceiling to get my SawStop Pro Cabinet Saw into the base. It would be a lot easier with several people, but it can be done alone with mechanical assistance. Quote
Beechwood Chip Posted May 5, 2012 Report Posted May 5, 2012 It's amazing what one person can do with mechanical assistance. I keep these techniques in mind when I'm working on my own. Quote
CessnaPilotBarry Posted May 5, 2012 Report Posted May 5, 2012 It's amazing what one person can do with mechanical assistance. I keep these techniques in mind when I'm working on my own. That's great! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.