baok Posted May 29, 2012 Report Posted May 29, 2012 I recently bought a Veritas small plow plane and am quite happy with it. I just got a letter in the mail from LV telling me that they now have a tongue and groove cutter add-on for it that I can get at a discount until mid-June. Anybody familiar with that and/or know whether it would be worth having? Quote
ChrisG Posted May 29, 2012 Report Posted May 29, 2012 I have them. They're handy if you periodically want to be able to cut T&Gs by hand but do not it enough to justify a dedicated T&G plane. Also, if you do not already have a dedicated rabbet plane the wides blades make the small plow into a nice little rabbeting plane. There is some setup required to use them, but after you do it a couple times it pretty quick and easy. I wouldn't necessarily advise running out and buying all the new blades. Maybe start by just buying the attachment and and then one or two of the new blades to fit the kind of work you want to do. For example, if you want to be able to cut T&Gs in 3/4" stock get the 1/4" tongue blade ...or the 3/16" for 1/2" stock... or the 1/8 for 3/8" stock.... Derek Cohen did a very good writeup on the setup and use of the tongue blades: http://inthewoodshop...sSmallPlow.html Quote
baok Posted May 29, 2012 Author Report Posted May 29, 2012 Ah. Good article - thanks for the link. Sounds like a tempting offer from LV. Quote
baok Posted June 9, 2012 Author Report Posted June 9, 2012 I ordered this and it came this week. My first attempt to make a tongue was successful and I promptly too off the new attachment and made a groove for it and it fit like a glove. It was very exciting and required only a bit of eyeballing to set up - no measurement. I must say that the attachment is a PITA I install (I think) but the plane itself is a joy to use. I've made many grooves over the past couple of weeks just because it's fun. I will make some more experiments with it and maybe won't gripe about the tongue cutter once I get used to it. Quote
baok Posted June 12, 2012 Author Report Posted June 12, 2012 Here's a photo of my tongue-and-groove results. https://picasaweb.go...170265778340914 Quote
Onboard Posted June 12, 2012 Report Posted June 12, 2012 Sorry Greg. The link went to a page that said "...that page was not found". FYI. Quote
Tom Conover Posted June 13, 2012 Report Posted June 13, 2012 I purchased this also. Have not had time to try it out though. Good to hear positive feedback Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.