Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Top coats over a gel stain

Featured Replies

Hi Marc

I'm building a small bookcase and am considering staining the horizontal boards for a 2-tone effect. My lack of dimensioning tools means I'll be using pine S4Ss from the home store, and it seems gel stain is recommended to minimize the blotchiness of pine. Two questions:

1. I know it's been a couple years since episode 73. Are there reliable water-based gel stains availabile now? or is the GF gel stain still the way to go?

2. I understand gel stain is effective on pine because it doesn't absorb in the wood. Does this preclude me from using a penetrating oil as a top coat? and if so, what top coats would you recommend? I'd like to use the same top coat on the stained and unstained boards.

Thanks

I've officially caught up on all the WTO episodes in the last 6 months!

Man .... you are jut on a topic I was discussing.

I am almost finished with a small alder entertainment table where I applied

1. First coat 1/2 shellac & 1/2 denatured alcohol ... wait 2 hours ... sand at 150

2. First coat of General Finishes gel stain ... wipe off ... wait one day and repeat the process ... wait 48 hours

Here is where I am looking for improvement.

3. Shellac as a sealer.

4. General FInishes Poly.

I would like to find a wipe on sealer and poly ...

SECOND APPORACH ... Use an oil finish which will allow the wood chosen to express itself but tat is a different issue.

One thing I learned. At least this worked for me and I suck ... SUCK ... at finishing.

In order to have margin for horror ... reducing is a great idea.

When applying the shellac sealer I did not reduce and was stuck with what I was able to produce at the time ... not perfect.

Then learning from that experience I read the Enduro waterbased poly finish and in the can it reads that you can reduce it up to 20% of water. I did that and had a lot better results.

Congrats on making it through that many WTO episodes! I hope your ears aren't bleeding! :)

1 - I haven't ever used a water-based gel stain so I can't really comment on the performance. But if you're looking for a simple way to avoid blotching while staying in the water-based world, I recommend trying Charles Neil's Blotch Control followed by a water-based dye. You can also follow up with an oil-based gel stain for more intense color if you like.

2 - Gel stains do absorb into the wood. They just don't go quite as deep and are capable of drying on a non-porous surface. You may have curing issues putting a straight oil on top of something like a gel stain. Furthermore, an oil does nothing to protect the layer of color. So you probably want to apply some sort of film. For that, there's nothing easier than a couple coats of General Finishes Arm R Seal.

Hope that helps.

M

(moving this thread to the finishing forum)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.