Pbmaster11 Posted July 7, 2012 Report Posted July 7, 2012 My lunch box jet planer didn't come with any dust collection hookups. took off the protective cover and within an hour and some scraps i came up with this! works great! Quote
davestanton Posted July 7, 2012 Report Posted July 7, 2012 PBMaster, I think this is a great start to a project that may keep you active for a few days to come. A couple of questions for you. Does the hood rise and fall with the blade assembly and also, does it restrict the depth of timber that you can pass through the planer? My other concern is that you are focused on the centre 4 inches of the cut with no taper in chute design. Would it be possible to design a chute that has a "hoper" look to it that could funnel the cjips from the full width of the cutters and more towards the rear of the machine rather than directly over it? Quote
Pbmaster11 Posted July 8, 2012 Author Report Posted July 8, 2012 You have made an excellent observation. I had milled some dimensional lumber and it worked great. I will look at redesigning it to extend the opening all the way across the blades. And yes it doesn't limit the height of stock you can run through. I had 4"x4" legs and I had to remove it and run without DC. Quote
nikbrown Posted July 13, 2012 Report Posted July 13, 2012 Nice job. I had a similar issue with my planer this was my solution: Quote
Pbmaster11 Posted July 14, 2012 Author Report Posted July 14, 2012 Excellent idea! I may modify mine to your design! allow me to mill taller stock Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.