Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to use Natural Pigment Powders

Featured Replies

Hi

I recently came into possesion of some containers of Natural Pigment Powder. I have Brown Umber and also Raw Umber powders.

I have never actually mixed my own pigment stains before and so I'm not really sure what to do with the powders and so I'm looking for a bit of a beginner's guide to mixing them, but information on the internet seems to be a little thin on the ground.

I have found a lot of sites warning about the health risks involved in using these natural pigments and so I am not really sure of the appropriate process of mixing stains, what other ingredients I will need and whether or not the finished wood will be toxic or not.

If anyone can offer a guide to how I should be using these pigments I'd be very grateful.

Thanks

Mike

  • Author

Hi Chip

Thanks for the link, however that video is only concerned with soluable dyes. What I have is natural earth pigment which is not the same thing.

However, in the last couple of days I have been able to find out a little more information about pigments and their use and may have found part of the answer to my own question. Here's some notes I've picked up:

* Pigments are non-soluable and instead are held in a medium like water or thinner.

* Pigments have no binding power of their own and so need to be held to the wood surface by a binder. Apparently oils, waxes and resins would work fine as a binder.

So based on that it seems that I can probably use the pigment powder to colourise most types of topcoat so long as they contain a binder of some sort. I can probably make my own stain by combining the powder with thinner and linseed or danish oil...although I may have to experiment with the mixing ratios a bit.

One thing I'm still not sure about is the toxicity of the finish once dried. I know most finishes will be non-toxic once dried, but will this still apply to my home-made pigment stain? How is the toxicity avoided? I can imagine that if a binder is holding the pigment to the surface that it essentially forms a barrier, but I'm not sure if this is true.

Once again any advice or shared experiences much apreciated.

Mike

Most natural pigments are not considered to be toxic, but there are a few rare minerals that are toxic, such as cinnabar, orpiment and cerussite. These latter pigments are rarely used in wood finishing. The main concern when using pigments is that particles become airborne and can be breathed into the lungs where they can become an irritant and are considered a nuisance rather than a hazard.

George O'Hanlon

Technical Director

Natural Pigments

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.