STL Woodguy Posted July 20, 2012 Report Posted July 20, 2012 I have a DeWalt 735 and while that unit is definitely good for a lunchbox planer, the motor is obnoxiously loud and I cringe when turning it on even with wearing hearing protection. (Then add the noise of the DC.) I wouldn't care about that if I was in the middle of nowhere, but I work in a townhouse basement shop with neighbors on both sides, so I have to use the unit VERY conservatively. I had looked into selling it and getting a bigger unit with an induction motor as I understand they're much quieter, but they are a little big for my shop (now nearly at capacity) and 600+ lbs is just way too much to handle for stairs, and I don't have people to help at will. I was in Woodcraft and spotted this JET molder/planer unit: http://www.amazon.co...t/dp/B00002265M The unit is smaller, doesn't weight nearly as much as the big boys, and I can definitely make this fit in the shop, not to mention it has casters built in which saves on the cost of buying a mobile base and can easy wheel into the area underneath my stairs if I want it out of the way. I had it powered on and was impressed with the noise level, could talk to the WC guy without ear protection. Cons is the 13" width, but I'm fine with that and it's equal to the DeWalt. Other con is that there isn't a finishing speed (I think), but I don't consider the planer a finisher. The molder is a nice bonus - and may come in handy later - but I'm not too interested in that part of it at the moment. Usually I am wary of combo units as they tend to not do each thing as well as standalone units, but I heard good things about the combo jointer/planer units, and as long as this works effectively as a planer, I'm interested. The Amazon opinions are a little dated and I found only one video giving the typical rundown of what it does. Has anyone on this board had any experience with this unit or these types of units in general? An alternative to this unit I found is the Grizzly G1037Z (http://www.grizzly.c...-Moulder/G1037Z). Possible it might fit in my vehicle as Grizzly is south of here, but it's not that difference in price over the JET (epecially as the local WoodCraft is having a 10% sale next weekend) and no mobile base. Quote
STL Woodguy Posted July 21, 2012 Author Report Posted July 21, 2012 Nevermind, found more opinion and talked with someone with experience with this particular unit for a while. Decided while I wouldn't necessarily use this in a production shop or anything, this is the best choice for "my" purposes. Got the discount early, took it apart easily and got it back home quickly (some reassembly required). Looking forward to planing in peace while the DeWalt can go scream at Craigslist buyers Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.