lclocke Posted September 3, 2012 Report Posted September 3, 2012 I have a 15" Grizzly bandsaw that needs a bit of work. First off the guides are tore to pieces where it wasn't taken care of by last owner. I'd like to replace both sets and need some information. Block or Bearings? Which brand? Which is the better blocks that keep blade cool? Thanks in advance for any input you have. Quote
minorhero Posted September 5, 2012 Report Posted September 5, 2012 Cheapest option is probably to buy replacement parts right from grizzly. I would give them a call and ask if they still sell the parts (they probably do or have something that would work). I am assuming that the guides themselves are torn up and not just the blocks. If it is the blocks you could replace them with ceramic guides for even cheaper. I have no experience with bearing guides but a lot of folks like them quite a bit, obviously they are considerably more expensive. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.