Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Table saw, band saw, plunge saw

Featured Replies

Question time.

I have a Makita MLT100 table saw which is a fairly good entry level model, it was OK for Daryl in the beginning but now that I'm becoming more adventurous in my projects I noticed that it isn't as accurate as it should be. I've tried everything to square it up but it's still 0.5mm out of square on the parallel and the saw bed cannot be adjusted so I was at a loss.

So I bought a plunge saw and track, which is much more accurate and safer to use and renders my table saw redundant for sheet work and only used for ripping timber (lumber),

to add to my growing list of machinery I was toying with buying a band saw for more intricate work, my question is around the usefulness of the table saw, the band saw will rip timber probably better than a table saw, so why have a table saw? Is there work that a plunge and band saw wont be as effective as than a table saw?

I’ve never used a table saw before, and everything is done by my band saw. I have no problems making my woodworks, so I didn’t mind getting another tool. For me, the band saw is the most effective tool.

  • Author

Do you use a plunge saw for sheet materials?

It all depends on what you normally do in your shop. If you are making furniture and you have to cut a half inch off of a 3 inch wide and 4 foot long piece it could come in handy. Or when cutting spindles with 1/8 deep tenons it comes in handy.

I have band saws and table saws and personally, a table saw is the heart of my shop. I guess I could use the band saw for more things but the TS is easy....like a lap joint...I could possibly cut it on the band saw, it can be done on the router table or with the material clamped and use a hand held router, it's just so simple to stick a dado set in the table saw and it's done. It's a discussion that comes up every few months and some guys here use the band saw heavily but for me, the TS is the heart of my shop.

As far as the non-adjustment of your Makita, and I don't know this tool well, but most ANYTHING can be adjusted with a shim or by loosening a table screw and adjusting. Are you sure you haven't missed something?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.