Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bandsaw Blade - Good ole' everyday blade recommendation?

Featured Replies

I am newer at woodworking and appreciate the wealth of knowledge that seems to follow The Wood Whisperer. I have enjoyed many articles, videos, and giveaways.

Back to my topic...I have all the essential power tools that one would need in the shop. I actually have (2) 14" Ridgid Band saws....I keep a 1/2" blade on one for resawing/ripping, and the other is a 1/4" blade for detail/curvature cutting. I do mostly weekend work, and I cut lumber ranging from Cedar, to Oak. Both blades are you run-of-the-mill Home Depot blades. I don't remember the brand (Vermont maybe), but they come from HD in a Red package. These blades seem to be poor quality...or maybe they are just OLD. The packages came from another individual that had one of the saws before me, but I know HD sells this brand.

I cannot afford $60 or $130.00 blades, nor do I do enough work to justify the expense, but I need a good blade source. Can you recommend a blade that is cost effective and upholds quality? When recommending a blade...please indicate the # tooth per pitch/inch, and the size (1/2" for example). I am also looking into buying a 1/4" blade for very detailed cuts, so if you have experience with small blades, please, chime in.

Again, I am looking for quality blades for average use. I am not completely certain of what difference things like 'skip tooth' makes, but I am open for all suggestions/definitions/help.

Thanks in advance for all of your replies, and each one will be considered!

Mark

I used to buy Carter blades and they work just fine and run in the $25 range. I've recently discovered Timberwolf and noticed a difference in quality. Slightly more at around the $35 range. I own the 3/16".

For resawing you MUST own a Wood Slicer from Highland Woodworking. I think they are in the $35 range and leave an very clean cutting surface that requires little sanding.

Hope that helps. The prices listed above are from memory and I could be slightly off.

  • Author

I use cheap, everyday, plain old Olsen All-Pro blades, cool blocks, and Mike Fortune's setup tips.

http://www.coastalto.../bandsaw_14.htm

http://www.finewoodw...aspx?id=34055��

(Might be subscription only)

Can you please check your Finewoodworking link? I am a paying member, and I cannot get it to display. I have heard several talk about an article from Mike Fortune on bandsaw tuneup, and I assume this is the same one? Thanks

  • Author

Can you please check your Finewoodworking link? I am a paying member, and I cannot get it to display. I have heard several talk about an article from Mike Fortune on bandsaw tuneup, and I assume this is the same one? Thanks

Sorry, I have the article working now...I have used The Wood Whisperers video on this same setup...It works great, but I still think my blade(s) are the problem.

Hey Mark,

i have the same Ridgid 14" bandsaw and have been contemplating blades as well. i have a 1/2" bosch blade on right now that i use for resawing and long smooth curves. i bought it from lowes for $10. i've been fairly pleased with it. it's miles above the stock blade that came with the saw. anyways, in all my recent blade research, i've found that timberwolf (from suffolk machinery) and highland woodworking's wood slicer blades are supposed to be excellent blades. the wood slicer blade has a thinner kerf of .020 and varied spacing of the teeth that cuts down on noise and vibration. this would be my number 1 choice for your 1/2" resaw blade. they are pretty specific in stating that this blade should really only be used for resawing as that's what it's made for. i think the timberwolf blade would be the perfect blade for your general purpose curves in either 3/16" or 1/4". the timberwolf blades have a slightly thicker kerf at .025". neither blade is going to break the bank. the wood slicer is around $30 before shipping and the timberwolf is around $20 before shipping. hope this is helpful to you.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.