Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Question about this set of sharpening stones

Featured Replies

I need a good set of stones to get me started in sharpening. The set below appears to be a great starter kit but doesn't have a polishing stone (extra fine stone). Can i use the 3 stones, then use the paste as a finer polish, or do I need to get a finer stone to polish the blades before going to the paste?

Kit: http://www.amazon.com/DMT-W6EFC-6-Inch-Diamond-Whetstone/dp/B003NCVFC4/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=4HC4FK782OM5&coliid=I2JESB3W56P63M

Paste: http://www.amazon.com/DMT-DPK-Dia-Paste-Diamond-Compound/dp/B000MF7JSO/ref=wl_it_dp_o_pC_S_nC?ie=UTF8&colid=4HC4FK782OM5&coliid=I2AAD59MQCASQI

Thanks

The main concern I would have is what you are sharpening. My old set of oilstones were 6" (making the width 2") and sharpening a 2 5/8 iron is a lot nicer on a 3"(which has a width of 3"). You can skew the iron but I find that if I have to skew it a lot I have a harder time holding my angle when freehand sharpening and if you use a jig (which I also do occasionally) you pretty much have to match the width of your largest iron to the stone. If diamond stones are the route you want to take this looks like a great way to get your feet wet. I have their 8" stones and they are fast but also wear down quicker than I like. It is always hard to say exactly how long they will last you, the main thing is to not put a lot of pressure on them as they will wear quicker and clean after each use. I had mine for a couple years and then started to notice a difference in how fast they cut. I bought a new set of oilstones and just use the diamond for if there is a chip or refreshing the main bevel when the micro bevel gets to large. As long as you know that going into it I think you will be just fine. As far as the paste, I have never used it.

  • Author

I have enough wet/dry paper up to 2500 grit to try the scary sharp method. I purchased a couple of the finer micron films from Lee Valley to polish them, so I will give this method a try. Do you guys have any tips on sharpening with this method?

Use a thick (non-flexing) perfectly flat substrate. Glue the paper down, ensuring absolutely no wrinkles or bumps.

I gave up quickly on this method because of the "flat" requirements for attaching the paper. Once glued, you've got to clean it off, and I had to do that often due to cutting or wearing out the paper. SS works but not as well for me as other methods. Best of luck!

I have enough wet/dry paper up to 2500 grit to try the scary sharp method. I purchased a couple of the finer micron films from Lee Valley to polish them, so I will give this method a try. Do you guys have any tips on sharpening with this method?

You can either go to a glass shop and get a scrap piece of plate glass, (mine is 36"X12"X3/8") or a 12"X12" marble tile from a box store, either will work just fine. SS is a good inexpensive place to start, I've glued sheets to glass with spray adhesive but switched to using the suction created between the water and paper instead, easier and cleaner. I would suggest hollow grinding and using a honing jig at first to ensure consistent resultts.

I started sharpening with this method because of the initial start-up cost but have since switched to waterstones, I also only use my honing jig when establishing the initial bevel. Sharpening can be intimidating but the learning curve isn't that steep and the difference between truly sharp tools and what you think are sharp is night and day.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.