Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help with oily finish

Featured Replies

Hey everyone,

I'm in a situation with a new technique and thought I'd ask for help. I'm using Marc's "finish the finish" technique where he suggests using mineral oil and mineral spirits on a festool 2000 grit platin pad to rub out a finish. I mixed about 3 to 1 mineral spirits to mineral oil based on part three of the sitting stool video.

Here are my questions:

1. The top (38" x 55") is cherry plywood and still feels a little oily after almost a day of letting it sit. I rubbed it down with a clean paper towel after thirty minutes and then again today after 12 hours or so. Should I keep rubbing down or should I use some mineral spirits or what?

2. What do I do with the platin pad? Just let it dry? Can it be used to sand again or only for this type of technique in the future?

Looking forward to your help.

Thanks,

Shawn

I usually wipe the piece down with mineral sprits to remove the oil. Ultimately, there will still be some on the surface even if in tiny amounts. A final wipe with a dry clean rag usually takes care of it.

As for the platin pad, throw it in a ziplock bag and save it for next time.

  • Author

Thanks marc. That's exactly what I did but there is still a slightly oily residue. Do I just keep wiping it down with a clean paper towel or should I try mineral spirits again? Or will this cure over the course of a week or so?

My stuff usually has a very minor residue, but its nothing more than what you would get from using an over the counter furniture polish. So I just leave it as is. Eventually it either wears off or absorbs. Its just temporary.

I guess if it really bothers you, you can wipe the surface lightly with denatured alcohol, but im concerned that might cause streaking.

  • Author

Cool. That's exactly what I was looking for Marc. Thanks for the help.

Yeah, I'm with Marc on the possible streaking.....I'm thinking just use a cotton T shirt and just rub it in a bit. I've been using some Padauk and I wipe it with lacquer thinner to clean it's natural oils off before gluing, then sand some. It will absorb Tung Oil fairly well but sometimes it's slow in doing it. I just keep going over it with a clean cloth and it will absorb what it needs and the rest will dry.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.