Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Interior finish questions on the camper

Featured Replies

Hello all,

Over the New Years long weekend I finished installing all the exterior skin panels on the camper. Winter has set in, and it's too cold outside for fiberglass or body filler to cure properly, so I am going to start on the interior. This isn't the sequence I had planned, but in the end, you play the hand you are delt.

For the interior I am using the scraps from cutting the exterior skin panels. It's 1/4" moisture resistant hardwood underlayment. It has one face that is light colored with a surprisingly pretty grain pattern to it. As a test I took a small scrap piece and rubbed on boiled linseed oil. I was very plesantly surprised at how good the grain looked.

What I am doing is cutting the scraps into panels that match the frame pattern in the walls, and applying them with counter sunk screws. Then I am going to take the red oak I have decided to use as cabinet facings, and rip some 1 inch strips, and resaw them on a band saw to 1/4" thickness as "batten boards" over the seams in the wall panels. Each batton board will come to a point on the end, so the intersections have an X pattern to them. I might end up putting a little bit of a chamfer on the edges of the batten boards to accentuate the X pattern at the intersections. The batten boards will be secured with screws evenly spaced roughly every 6 inches down the centerline of each board, with chrome plated dome caps to match the bright nickle hardware on all the cabinetry.

Here's the real finishing part. Being that it's a camper, I need a tough finish that will stand up to the enviroment, including heat, cold, and widely variable humidity. Given the nature of camping, and of towing down the highway, I need my finish to stand up to bumps, bangs, and scrapes, and still look like the luxury home away from home I am building.

I want to preserve the light color of the interior wall panels, so I am planning to give them a coat of Bull's Eye Seal Coat Shellac, followed by General Finishes Seal-A-Cell Clear. The cabinet facings and batten boards are red oak, but I want to give them a bit of color to contrast with the light colored wall panels, so I'm going to go with General Finishes Gel Stain in Georgan Cherry. To get a similer gloss and sheen on the cabinet facings, What top coat would be best over the gel stain? Does anyone see any particular problem with this plan?

Thanks everybody,

Jeff

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.