Recommended Posts

Posted

I was watching this item on ebay for the last 3 weeks never thinking I would purchase it, the seller is

311 miles 1 way from me and wanted 900.00 too much for an g1021. This machine had one great thing going for it. They had upgraded the head to a byrd shelix. The third time it was relisted they added "make me an offer" to the listing. I called them talked awhile and found out some of their interests and I had what they wanted a drafting table I paid 75.00 for, so the final deal we settled on was 400.00 and my table I was on the road yesterday for 12 hours round trip with travel cost of 125.00 I ended up including all expenses 600.00 not bad, but I'm not done just yet with this deal. I plan on using it awhile taking out the shelix and replacing it with the original Then Ill buy a G0543 swap out the heads I will end up with a Z model planer that Ill be into for around 800-900 depending on what I can cash out the other planer for. They live in Green Forest AR which is only about 45 minutes away from the Grizzly Springfield Store where they purchased the machine originally I was very tempted to drive up to the store for some window shopping but my wallet and body was too burned out to make the detour.

post-5469-0-02080000-1359381087_thumb.jp

Posted

The decibel level with the shelix is remarkable I knew it would be quieter but I was very surprised. I only have one neighbor and out of respect I never planed early in the morning or on the weekends but now I see no problems planing early or late. What size torx bit is used for rotating the tips? Also I wanted to check the gear oil level but the fill hole makes it very hard to check from the top and if I loosen the bottom drain Im just gonna loose oil so how do check levels?

Posted

The decibel level with the shelix is remarkable I knew it would be quieter but I was very surprised. I only have one neighbor and out of respect I never planed early in the morning or on the weekends but now I see no problems planing early or late. What size torx bit is used for rotating the tips? Also I wanted to check the gear oil level but the fill hole makes it very hard to check from the top and if I loosen the bottom drain Im just gonna loose oil so how do check levels?

Fill it untill it runs out of the fill hole then its full.

Don

Posted

The decibel level with the shelix is remarkable I knew it would be quieter but I was very surprised. I only have one neighbor and out of respect I never planed early in the morning or on the weekends but now I see no problems planing early or late. What size torx bit is used for rotating the tips? Also I wanted to check the gear oil level but the fill hole makes it very hard to check from the top and if I loosen the bottom drain Im just gonna loose oil so how do check levels?

I have a shelix cutterhead on my combo jointer/planer and it's nice and quiet.  You can even run end grain cutting boards through it without any problems.  Definitely the best thing you could do for a jointer or planer.  Enjoy that planer!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined