Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Earlex and GF waterbornes - some questions

Featured Replies

I'm not quite sure what information you are trying to get from GF, but all I really care about is what products give me the best protection in a bathroom. The lady clearly said that High Performance doesn't have cross-linker but Enduro-var and Enduro Poly do.

I'm not trying to get any information out of General Finishes. :blink: Trying to help you understand my earlier comments.

Look at it this way, no-brand cigarettes, no brand soups. Who do you think makes the cigarettes and who makes the soup. Its the same guy that makes the Winston's and the same guy that makes the Campbell's just different label's . It's dollar cost averaging, sell one high price sell one low price, the average is the target. This is retail vs professional products.

Another example, General Finishes makes Seal-A-Cell, it's basically thin down Arm-R-Seal. So what are you really getting Arm-R-Seal or Seal-A-Cell. I bet if you call General Finishes on that you will get a... no it's not. Just suggesting that the High Performance, more that likely is the same "base" product as Clear Poly that contains these "cross linkers" you mention.

-Ace-

I'm not quite sure what information you are trying to get from GF, but all I really care about is what products give me the best protection in a bathroom. The lady clearly said that High Performance doesn't have cross-linker but Enduro-var and Enduro Poly do. 

It realy doesnt matter what they say about the finishes, look at whats in print. The MSDS sheets are up to date and are dated. No updates for quite a few years so no big changes for quite a few years. Look at the solids on the MSDS sheets this will give you a general Idea of whats in the finish.

Performance is a poly acrylic blend with most of it being acrylic.

Poly acrylic is just that a poly a acrylic

Enduro-var is a uethane

Enduro poly is a proprietary polymer they call poly uethane by discription

Enduro is self crosslinking

Enduro-var is self crosslinking

Performance has so little poly it shouldnt benefit from crosslinking

Poly acrylic has so little poly it shouldnt benefit from crosslinking

If they were just relabeling as suggested the msds sheets legally would have to reflect just that, they are all quite different.

Finish products are labeled professional for a reason. The professional product is more efficient to use than the retail. The professional product requires professional handling to be as safe as the retail product. Or its just pure and simple marketing, labeling professional makes people believe its better.

Look at efficiency on its face. All the mentioned finishes are low solid finishes ranging from 21% to 30% but on its face only one of the products is labeled professional and does have a higher amount of solids. We know 1600 x solids = coverage @ 1 mil. The more solids the more efficient.

Pricing structure does not reflect the lower consumer price and higher professional with the middle being the target theory or even vise versa.

Poly acrylic $42g

High performance $53g

Enduro poly $50g

Enduro-var $67

Only the Enduro poly is soley in their professional line and is priced very close to but less than the high performance.

For your bathroom looking at solely what is in writing. Only the Enduro poly passes kcma. You decide wether the rest failed or was never tested its up to you. Personal id lean to the failed side just to know for sure the finish is going to do its job. As for crosslinking. A crosslinker additive is a catalyst. The reason its not all put in the finish at a factory is that the shelf and pot life is next to nothing. They put enough in for the finish to be used out of the can but not enough to get the best crosslinking affect. Since GF told Ace that the crosslinker is not needed. Yet they say their msds sheets are accurate and havent changed since before they were pushing crosslinker........ Id just change brands to something that is fully crosslinked like Centurion poly at least you know your getting a fully crosslinked finish since they dont add any catalyst at the factory its a two part finish.and with the higher volume of solids the finish is going to go further with alot less waste.

Don:

 

Just checked some prices by me:

 

Retail

 

Polyacrylic  1 gal = 50.00

High Performance 1 gal = 68.00

Enduro Var 1 gal = 85.00

 

The professional side:

 

I would assume since your a "Joe woodworker hobby type, such as the case is here" you can't qualify for volume pricing or wholesale as a professionals can obtain. So Joe woodworker hobby guy would have to pay retail price for any safe professional products.

 

Now you have to pay shipping on top of retail price, so wouldn't going to a Rockler or Woodcraft retail be more cost effective?

 

I really wish you would give Rob at call at General Finishes, he can answer any question you have on General Finishes products.

 

-Ace-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.