Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grain filler for mahogany

Featured Replies

I am wondering what color grain/pore filler I should get for mahogany. Should I get some kind of brown or just get neutral/natural? I will be applying clear finish over this, no dye or stain. Also I have several pieces to do, and some of the mahogany is kind of light salmon color, other pieces are darker, and I'd just like to purchase one quart if possible  Thank you.

Are you looking to even out the color across the grain or keep the variation?

Clear WB like centurion will take dyes to equalize the coloring just as if you didnt fill the grain at all.

Most manufactures have a Mahogany color grain filler. I like Woodwise brand fillers. Can be found at most hardwood flooring dealers.

 

-Ace-

  • Author

What will the clear vs mahogany color do to the look of the finished piece? I don't mind the color variation, I'd prefer to keep it as natural looking as possible.

  • Author

Basically I don't want any color alteration just pore filling, I assume that means get the natural kind?

Clear is just that clear or think of it a a topcoat just piled on to fill in the pores. Tinted fillers add a little definition to the grain by changing the color slightly say to a lighter or darker shade. Adds interest, like a woman who highlights her hair.

 

-Ace-

If you want a smooth feel like on a piano and you want to keep it looking natural, I'd go with the clear filling to fill the pores. Experiment first!

Let's see if this link works..  Here are a few different stain / filler samples I put together a month or so ago.  The wood used is Sapele (ribbon stripe mahogany)  Although it's a stain / filler much of the character comes through (IMO actually makes the wood look better like Ace mentions :-)

 

If you click the 'Next' button in the top right corner you'll be able to see pics of those same samples before the finish was applied (only stained) which makes a huge difference.

  • Author

Do I need to do any kind of seal coat before applying filler? What kind of applicator works well to apply filler?

That depends, what filler are you thinking of using? What color did you pick?

Apply with an old credit card. Auto body store have plastic squeegee to spread Bondo with. Piece of Formica works ok.

-Ace-

  • Author

I got Behlen Pore-O-Pac Medium Brown Grain Filler and Water Base Grain Filler, Neutral, still not sure which color to use yet, will do some testing first. I believe they are both water based though. Seal or no seal? I sanded up to 220, is that high enough? Then after application and wipe off hit it with 220 again or higher? Thanks

I got Behlen Pore-O-Pac Medium Brown Grain Filler and Water Base Grain Filler, Neutral, still not sure which color to use yet, will do some testing first. I believe they are both water based though. Seal or no seal? I sanded up to 220, is that high enough? Then after application and wipe off hit it with 220 again or higher? Thanks

Squeegee on then sand. Keep doing that unti your happy.

Pore-o-pac should be solvent based (confirm by taking a look at the can) and yes you should do a thin seal coat. What this does is limit the take up of the colorant from the grain filler into flat grain of the wood.

 

Water-based grain fillers I have used goes directly onto the wood and won't "stain the wood so no need to use a sealer. Not sure on Behlen water-base. I guess it wouldn't hurt, why not try on a scrap piece. Just wonder if a sealer would lessen the hold of the filler in the grain.

 

I would suggest you test applying each product to a scrap to get a feel for what you are after.

 

-Ace-

I normally use Jenkins Jecofil thixotropic grain filler. You wipe it on with a rag with the grain and then wipe the excess off cross grain. Let it dry for 6 to 12 hours (dependant upon local shop conditions) then sand it back to the wood with varying grits up to 320. It does take some time and you may need to apply it twice to make sure you get all pores filled. It leaves a really smooth surface ready for finish. I've experimented sanding just to 220 but when I compared to 320 test pieces I found it gave better results when finish was applied when the wood was at 320 grit.

 

I've also used the stuff that is applied with a scraper/credit card and quite frankly life is too short to do it that way. I found it takes an age to sand it back if you haven't scraped the excess off properly (it clogs the sanding disks even with shop vac attached) and it also takes much longer to apply hence the Jenkins grain/pore filler I use.

 

On mahogany I would use the transparent one rather than a colored one.

  • 2 years later...

Hi

 

Just new to this forum and seeking advise. I have applied Jenkins antique mahogany grain filler to a mahogany table top that I intend to french polish.  I did not stain first.  I am just wondering if I can apply mahogany stain over the filler? The table top after applying the filler (still drying) appears to be relatively smooth and i intend sanding with a 220 grit paper first and finishing with a higher grade.  

Would appreciate a little advice, thanks.

 

2 hours ago, PG said:

Hi

 

Just new to this forum and seeking advise. I have applied Jenkins antique mahogany grain filler to a mahogany table top that I intend to french polish.  I did not stain first.  I am just wondering if I can apply mahogany stain over the filler? The table top after applying the filler (still drying) appears to be relatively smooth and i intend sanding with a 220 grit paper first and finishing with a higher grade.  

Would appreciate a little advice, thanks.

 

Yes you can. I use Jecofil (that's what I think you mean) quite a lot and it will take a stain.

Welcome to the forum.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.