Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

can I use this HVLP gun?

Featured Replies

I'm an unfortunate non-HVLP owner.  I've been wanting to buy a Fuji or Earlex turbine for a while, but other tools always seem to take priority and I continue to wipe on my finishes.

 

A friend of mine's brother is in the auto body industry, and he gave me this HVLP gun that was just sitting around.  Brand new, but I know nothing about it...or HVLP in general.  Could be top of the line, could be complete junk.  It's made in USA, so maybe it's not bad?

 

I'm wondering if anyone can tell me about the gun and if there's any way I can use it.  The guy who gave it to me said I need at least 13cfm to use it, but my compressor is only rated at 8.6cfm...however, the front of the instruction manual says it only requires 7.5cfm @50psi.

 

The gun is a Sharpe Platinum gravity feed...I looked all around for a model number but didn't find one.

 

My compressor is 1.1HP, 17gal, 8.6cfm.

 

I have a feeling I'm probably SOL here, but thought I'd ask anyway.  Maybe I can use it for short periods to spray small projects?

 

Any advice appreciated!

 

4913022.jpg

 

4913020.jpg

 

4913021.jpg

 

That is a nice gun. Sharpe make decent guns for the money unfortunately you will need a bigger compressor. The gun can still be had new for about $250. You can use it with your compressor but it will max it out and really shorten its life. If you want to try, add a water separator and go for it. It is 7.5 cfm at 50psi.

 

Optimum is 13 @90

  • Author

Pretty much what I expected, thanks.  Can you tell me more about the water separator deal?  Like I said, I know nothing about HVLP.

 

Maybe I'll just sell the gun and put that money toward a new turbine.

 

Oh, and I found the model number...it's 2013.  And it's 1.3 mm, whatever that means.

Looks like model 3013 from the hand written number on the box. Comes with a 1.3 tip and #2000 air cap??????? The gun set up is for automotive clear coats. Play with it and see if it works.

 

Get a large piece of cardboard and lay out on a bench. Load the cup full of water and pretend your spraying a table top. See if you can spray without taxing your compressor. These guns are suppose to work in the "green zone" but guys usually have to kick up the air to get better atomization. So to work it in the green zone you have to play with viscosity of the product.

 

-Ace-

  • Author

Ace, it's a #3000 air cap.  Is that better or worse for me? :D   And what's this green zone you speak of?

 

Don, nevermind about the water separator...I know what you're talking about, duh.  Thought it was a gun accessory...didn't realize you were talking about the compressor.  I have a compressed air hose system sitting in a box that I need to install...it has a couple of those valves to let the water out.  Think that would be sufficient?

You need a water separator. It will look like a canister in the air line. Green zone is operating pressure. Look at your gauge, the sharpes come with a green zone regulator. The gun should operate best some place within the green zone. 

Not sure what the 3000 cap is. It denotes how it shapes the fan pattern for primer/paint and clear coats. You may want to do a google search?

 

Yep dwacker has it right about the "green zone" on a gun regulator.

 

You need more than a water separator as suggested. What about oil vapor? Most air compressors are lubricated with oil. Just like a car engine, oil can blow by the piston rings mixing with the hot compressed air causing oil vapor. Oil and finishes don't play nice!

 

Do a google search and look for M60 filter. It uses single ply toilet paper as oil vapor and water filter. 

 

-Ace-

You can buy a small inline unit for under $15 to try out to see if this is the right type of setup for you. The inline units separate water, oil and particles. If you decide that you want to go the compressed air route then you can step up and buy a better setup with desiccant.

  • Author

Thanks for the advice, guys.  It sounds like I either need to buy a real compressor or sell the gun and go with a turbine.  Don't think I want to invest any money in my current compressor system since chances are it's not adequate for this gun anyway.  I have no other need for a bigger compressor, so I'm thinking turbine is in my future.

 

Just one more thing...I'm assuming I wouldn't be able to use this gun with a turbine?  It's designed for compressor use only?  Or not?

Thanks for the advice, guys.  It sounds like I either need to buy a real compressor or sell the gun and go with a turbine.  Don't think I want to invest any money in my current compressor system since chances are it's not adequate for this gun anyway.  I have no other need for a bigger compressor, so I'm thinking turbine is in my future.

 

Just one more thing...I'm assuming I wouldn't be able to use this gun with a turbine?  It's designed for compressor use only?  Or not?

 

If your going to go turbine then Id go with a true turbine gun not a conversion gun. You might want to think about LVLP. You can buy a good LVLP gun for about the same as the earlex and have a much better gun that is not a bleeder.

  • Author

I'll think about that.  Who makes the cat's ass LVLP gun?

Here she is Iwata LVLP LPH 400 134LV its a sweet-heart ;) The cats ass!

 

Got it for $300.00. It was a demo at the local auto body store. Good way to get quality spray guns. Sent away for a rebuild kit, was good as new!

 

 

IMG_4313.jpg

  • Author

Iwata....thats just me. :) :) :) :)

 

-Ace-

 

Is there a particular model you'd recommend?

 

edit: just saw your last post.  Thanks!

 

 

 

 

Geez, I didn't mean to open this can of worms on myself.  I've got a lot of research to do yet.  I think I need to back up a little and start a new thread....

 

 

For spraying, I have a number of guns for specific tasks. I carried my former car painting skills over to the finishing woodworking world, and it was a very smooth transition for me. In fact, I think it gave me an edge for spray applications because I was already there and needed no further tuning. Spraying lacquer for furniture is childs play compared to spraying urethane. It is all preference, but for me, I shoot my base (color) coat with a 1.3mm tip on an hvlp. For clear coat, I use a 1.4mm tip on an RP (reduced pressure). This allows me to achieve better atomization at higher pressure to really lay on a glassy smooth finish. I have used Sata for years, recently got really turned onto a Iwata LPH400 shooting cab-acrylic lacquer. Iwata has come a long way and have a great line of spray guns, rumors have it that they don't match production speeds of Satas. I think it's safe to say you're not in a rush though while you are spraying, so I can gladly recommend the LPH400. I would also recommend the 3M PPS system. With this cup setup, you can spray inside cases, flipping the gun around to get into tight spaces and not worry about spilling material. Genius! 

post-3732-0-69331300-1365560837_thumb.jp

post-3732-0-58573300-1365560846_thumb.jp

post-3732-0-04650900-1365560856_thumb.jp

that sharpe gun looks a lot like the gun I have.  I bought mine about 15 years ago to spray my car. I just recently dusted it off and have used it on a few occasions to spray some water based finishes.I have a 4 gallon compressor and it runs almost constant when I spray. I have to give it a minute to catch up once in a while. I don't use it often but since I already had everything I figured I'd give it a whirl.

  • Author

I like what I've read so far about LVLP, but I don't like having to rely on my compressor...it's not a high-end unit by any stretch.  And for the price of that Iwata, I can get a Fuji Mini-Mite 3, and won't have to worry about my compressor at all.  And my compressor is probably the most annoying tool I own, in terms of obnoxious noise.  :blink:

 

The finish on that guitar looks amazing, Freddie.  Top notch!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.