Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to stain and seal a bathroom vanity?

Featured Replies

Hi all,

 

I am new in woodworking. I am doing now a custom bathroom vanity and I would like to know how to seal and stain it a matt finish and at the same time protect it from water damage. What I should use and how?

 

Thanks

I used Exterior 450 water based (you can wipe, brush or spray it) from General Finishes on my vanity see here. You can use any of GFs Exterior 450 stains underneath the 450 top coat and they do it in matt as well as all the others. 

  • Author

Thanks Terry, The vanity looks great. Do you suggest a special kind of wood like teak? or I can just use any wood?

I wouldn't use teak as it is quite abrasive on your tools and has natural oils in it that may affect the finish. Any locally available hardwood would be good but woods that are easy to work and look good for a newbie are white oak, ash, beech, mahogany, cherry, maple. The list goes on I'm sure other members will make a few suggestions. 

I used Exterior 450 water based (you can wipe, brush or spray it) from General Finishes on my vanity see here. You can use any of GFs Exterior 450 stains underneath the 450 top coat and they do it in matt as well as all the others. 

 

Beautiful work!!

You can use what ever wood you feel comfortable using. For bathroom vanities look for a finish that is proven to hold up to household chemicals like bleach, ammonia, alchohol the obvious things that get used frequently in a bathroom. Exterior finishes are great if you have sun light issues and are worried about UV damage otherwise they are usually not the choice for interior cabinetry. Target coating, ML Campbell, Sherwin Williams, CIC, Ellis Coating, Renner and Gemini all have finishes that have made their way through KCMA testing by large numbers of cabinet makers.

If your wood isn't known to blotch stain it. If it is seal it with shellac. Then you'll finish it with either pre or post cat lacquer. I suggest pre because you won't have to mix anything.  Checkout some of the brands Particle Board suggested. 

  • Author

Thanks :)

 

You can use what ever wood you feel comfortable using. For bathroom vanities look for a finish that is proven to hold up to household chemicals like bleach, ammonia, alchohol the obvious things that get used frequently in a bathroom. Exterior finishes are great if you have sun light issues and are worried about UV damage otherwise they are usually not the choice for interior cabinetry. Target coating, ML Campbell, Sherwin Williams, CIC, Ellis Coating, Renner and Gemini all have finishes that have made their way through KCMA testing by large numbers of cabinet makers.

  • Author

Thanks :)

If your wood isn't known to blotch stain it. If it is seal it with shellac. Then you'll finish it with either pre or post cat lacquer. I suggest pre because you won't have to mix anything.  Checkout some of the brands Particle Board suggested. 

You want to follow the instructions for the brand you end up choosing. Many brands get their moisture resistance from using the proper sealer prior to the top coat. Shellac is not a proper sealer for these finishes. Many pre cat and post cat lacquers require the use of vinyl sealer under the top coat. This prevents moisture from entering scratches and edges. Moisture causes blistering and separation that eventually turns into large chips.  

 

I tried a spray can of Gemini Gem Coat Satin Precat the other day. A single can may be sufficient for a vanity and it only costs about $6.

 

-Randy

If you do end up using teak, being an oily wood you will have to use some acetone to wipe joint areas for glue to penetrate properly. I am not sure of how the oils in the wood will affect the finish.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.