Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wide dado advice sought

Featured Replies

I've been making some 2" wide dadoes. I defined the edges with a saw and finished up the bottoms with a router plane.

In between those steps I tried bashing out most of the waste with the widest chisel I have. This mostly works but occasionally will get away from me and I'll dig out a but too much.

Is there a better way to go about this? Multiple saw cuts perhaps?

Two options that I can think of:

 

1. Hammer less hard. It's not a race.

 

2. Don't worry about it. If there are divots at the bottom of the dado, you won't see them unless they are at the ends, and it won't compromise the strength of the joint unless you've done a real butcher job, which I know you didn't.  ^_^

Usually I go with the multiple saw cuts approach just to "loosen" up the meat in between the walls.  Really at 2" wide you would only need 2 or 3 saw cuts to break it up and now you need much less effort to chop out the waste.  Just make sure you have some safety glasses on as those little pieces will rocket all over the place and mostly back into your face.  The saw cuts act as a relief cut so any grain run out you encounter doesn't have a chance to get started and dive too deep. 

I would suggest a router. I don't know the details of how you are set up, but consider building a variable width dado jig for your router. You can use it in a whole bunch of projects. If you build the jig you won't regret it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.