Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Well that was harder than it needed to be

Featured Replies

I'm working on my first bent lamination project. It's a fly fishing net. I needed a groove around the outer perimeter of the net. I needed it to be approximately 1/16" wide. I should have cut the groove prior to glue up. But I didn't.... So, instead, I had to cut the groove with hand tools. Took me about an hour. I cut the borders with a wheel marking gauge. Then chiseled away the waste......very slowly. I finally got there. Woulda taken me 16 seconds in a tablesaw. Lesson learned for next time.

I would have set a router bit just barely above the base of the router and put a tall fence next to it with a center line across the table and up the fence then freehanded it . That takes some nerve and skill.

Or you could have used a scratch stock. I made one from a scrap of wood and an old cabinet scraper blade. Filed the shape then sharpened it , sawed a slot for the blade and held it in place with a small "c" clamp. But making one took more time than you used to chisel yours out.

  • Author

Steve,

I considered the scratch stock idea as well, but I determined it would be quicker to just bang it out with chisels. The groove came out pretty nice, albeit, the scratch stock probably would have done a better job.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.