Eric. Posted May 27, 2013 Report Posted May 27, 2013 Hey guys, does anyone know if a 6mm shank can be used in a 1/4" collet? After I bought my Auriou rasp, I decided I'd like to have a powered version, so I wanna get one of their rotary rasps to use in my die grinder. http://www.highlandwoodworking.com/auriou-rotary-rasp-6mm-shank.aspx Problem is they seem to only come with 6mm shanks and my grinder (obviously) has a 1/4" collet. The difference is only .01378, but I guess this might be significant enough to pose a problem...definitely don't want this thing flying out of the grinder while spinning. If the answer to that question is "probably not," does anyone know where I can find a 6mm collet that will fit my die grinder? I've looked but couldn't find. -OR- Does anyone have recommendations for another brand of HIGH quality carving burrs/rotary rasps (with 1/4" shanks)? I have a couple Kutzall burrs...they're okay...would like to try something else. Thanks all... Quote
wdwerker Posted May 30, 2013 Report Posted May 30, 2013 My Festool trim router has 2 colletts, 1/4" and 8 mm. The 8 mm Festool bits are pricey but much more ridgid. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.