man of wood Posted June 17, 2013 Report Share Posted June 17, 2013 I have a 6" grinder ( until I can get a 8") The set up calls for the center of the wheel to be 6 1/4 to 6/12 from the base of the Wolverine's bade, and I did this. This makes my Platform Assembly below center of the wheel. Don't I want it to be at center?............ with the Platform Assembly Is this 6 1/4 to 6 1/2 just a set-up start? Thanks Thomas Quote Link to comment Share on other sites More sharing options...
calblacksmith Posted June 18, 2013 Report Share Posted June 18, 2013 I setup according to the directions and this is the result. I suppose the table is slightly below the center of the wheel but I never grind with the rest level, it is at an angle to the wheel to grind an edge on the tool I am working with. This is an 8 inch slow speed grinder. You are going to love the setup, it works great. Quote Link to comment Share on other sites More sharing options...
mikem Posted June 18, 2013 Report Share Posted June 18, 2013 I would think you would want it slightly below middle as most of your tools have enough thickness to them so that they will reach the middle, or just above on their own. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.