Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Turning blanks, moisture and carving

Featured Replies

I bought a katalox (2 x 2 x 24") and a bloodwood turning blank (2 x 2 x 18") because I needed a screenshot of a certain ecommerce site's checkout process for work. And they arrived, and they're pretty. But they're also sealed in wax and green (as far as the seller's concerned).

 

First, removing the wax: heat to soften (if necessary), scrape, & mineral spirits for any residue? Any other alternatives? I figured I'd leave the ends sealed.

 

Second, I'd be resawing them to 1" (well, minus the saw kerf) thick. I would be sculpting/carving them into training knives for martial arts, so the final dimensions are about .875 x 1.5 x 9". I know the rule for drying is 1 year per 1" of thickness, but these are going to be pretty small pieces. Any idea how that would affect the drying time - or if I'd even need to worry about drying at that point?

post-6112-0-63813800-1372724979_thumb.jp

  • 4 weeks later...

My stock is still sealed with wax, and I've had some of it for a few years.  It's still got some moisture in it.  The reason (as it was explained to me) for the wax was more moisture is removed through the end grain than through the faces.

 

I'd say removing the wax, letting it sit there for about a week, then cutting it in half should accelerate the drying time to an approximate moisture you can use.  But I'd still keep an eye on it for at least a few months after it's been cut in half.

 

That should reduce any checking or moisture-related issues.  But I've never tried to do what you're suggesting, so I don't know for certain.

I have had only one piece of Ebony that was sealed. I simply scraped off the wax with a scraper and wiped with a rag.

The remaining wax should not be an issue as you are going to shape the wood anyway and you will remove the surface and any remaining wax when you work the wood.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.