snichols Posted July 20, 2013 Report Posted July 20, 2013 I'm attempting some butterfly inlay for the first time on a project for my little girls. The project is a "Little Helper Tower" and I'm using the butterfly inlay kit is from eagle america (see the attached pic or check out my blog for more details). Here are my questions: 1. What's the best way to hog out the waste in the female section of the inlay? I was thinking forstner bit on the drill press or a bench chisel. I'm afraid I'm going to break the 1/8" bit. Maybe a second router but I'm thinking visibility is an issue. 2. I'm not sure of the depth especially since this is going to bridge two pieces like on a large Nakashima style slab. I'm thinking the inlay needs to be the thickness of the platform but I'm not sure if this bit can go that deep. Any thoughts? 3. Any good resources on how to do this type of work? Thanks everyone. -Shawn Quote
Beechwood Chip Posted July 20, 2013 Report Posted July 20, 2013 2. I'm not sure of the depth especially since this is going to bridge two pieces like on a large Nakashima style slab. I'm thinking the inlay needs to be the thickness of the platform but I'm not sure if this bit can go that deep. Any thoughts? You don't need any strength here, so make it any thickness that you want for aesthetics. Imagine a bridge across a stream - that's one of your boards. Then you build an identical bridge right next to it - that's your other board. They don't have to be attached to each other. Quote
knotscott Posted July 22, 2013 Report Posted July 22, 2013 Once you've got the perimeter cut with the 1/8" bit, there's no reason you can't switch to a bigger stronger bit to hog out the center. It's actually a really good idea...those 1/8" are very prone to breaking....even the good ones. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.