Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anyone used automotive finishes on wood?

Featured Replies

I have probably painted as many metal projects as I have wood.  I sealed and stained some wooden jambs and was contemplating the next coat.  I looked over at an automotive clear coat (2 part) that I had used on an RV repair.  I thought, why not, it will just sit there if I don't. 

 

The clear coat was a gloss finish.  As usual, there were hardly any directions. I didn't want a gloss finish on my final project, but I thought I would top coat it with urethane satin or semi-gloss.

 

I liked this stuff when I used it before.  It is low VOC (always appreciated) and sprays easily with an HVLP gun.  I sprayed it on and it went on easily.  It is hard as a rock I noticed as I sanded it. 

 

I finished the jambs with 1/2 satin, 1/2 semigloss mix and it came out great.

 

I know that Jegs or Summit sells a semigloss clear automotive finish and am thinking of trying it next time.  Anyone used those.

 

Jim

Can you post a pic of how it turned out? I would like to see it.

I have never used automotive paint at all, but I have seen a guy use body filler (bondo) as an inlay mayerial.

Auto finishes are to hard and will crack. There are additives that you need to use on wood to make the finish more flexible to help with expansion and contraction. Other than you already had it on hand there is no reason to use automotive finishes. If your just wanting a glass smooth finish just plain old lacquer is all it takes.

Auto finishes are GREAT on wood.  Many solid body guitars are finished with auto enamels and lacquers.

 

There was a recent fad that came and went in my area involving ultra-modern kitchens done in very high gloss colors.  Colors you'd normally see on exotic cars, including screaming reds and yellows, nearly day-glo greens and blues, and even metallics.  The doors were most often MDF, with edges filled with spot putty, then primed and painted by body shops.   A flex additive is added to the paint, the same one used for plastic bumper covers.

 

The look was really sharp when new, but as many might predict, not so good with fingerprints...    :wacko:

 

There was a recent fad that came and went in my area involving ultra-modern kitchens done in very high gloss colors.  Colors you'd normally see on exotic cars, including screaming reds and yellows, nearly day-glo greens and blues, and even metallics.  The doors were most often MDF, with edges filled with spot putty, then primed and painted by body shops.   A flex additive is added to the paint, the same one used for plastic bumper covers.

 

 

 

It went out as fast as it came in because warranties and lawsuits were through the roof. Cabinet shops were trying to duplicate the ultra modern euro thing without understanding the finishes and trying to fake it with auto paint. That was back in the early 90's. About the only thing that was worse in terms of legal battles is shops spraying latex on cabinets and that will never end.

  • Author

Auto finishes are to hard and will crack. There are additives that you need to use on wood to make the finish more flexible to help with expansion and contraction. Other than you already had it on hand there is no reason to use automotive finishes. If your just wanting a glass smooth finish just plain old lacquer is all it takes.

 

I used a two part epoxy sealer before applying the finish (Smith's to be exact).  A couple of years ago I refinished my cherry front door applying two coats of Smith's and finishing up with two part Epifane marine finish.  Supposedly Smith's will handle the lack of flexibility. 

 

The jambs I refinished were finished with a catalyzed acrylic lacquer previously.  It was supposed to be almost as tough as urethane--they lied.  it scrapes off easily where the screens go in and out and unfortunately the window manufacturers make them a shade to big.

 

The nice thing about the clear coat was the fact that it doesn't run easily like some urethanes do.

 

5a201743-b994-4cb0-98a7-19a6c6ab88f2_zps

 

Jim

 

The jambs I refinished were finished with a catalyzed acrylic lacquer previously.  It was supposed to be almost as tough as urethane--they lied.  it scrapes off easily where the screens go in and out and unfortunately the window manufacturers make them a shade to big.

 

 

Even though it looks like a seventh-grader did their web site, I LOVE THIS STUFF for exterior wood.

 I have used high end marine finishes on exterior doors, with the epoxy sealer, I know since 1991 and as far as I know, none of it has been redone.  All of those doors are under an overhang or a porch though.  I saw one this past weekend, and it still looks good.

 

I'm not sure about the clearcoat.  I don't have any reason to try it, and would worry about it.

PB and Barry are right. Nitro Cellulose was used on cars in the 1950s (DuPont were one of the manufacturers) and Fender got hold of them to paint their guitars garish colours (Candy Apple Red, Lake Placid Blue etc), then Gibson used TV yellow and the clear coat stuff on some of their guitars. The finish gradually cracks over time and some Les Pauls from around 1958/1959 exchange hands for hundreds of thousands, if not millions of dollars now. Not because they were finished with nitro but it is a contributing factor. So Fender, along with other guitar makers, gradually changed over to polyurethane and acrylic finishes as paint technology advanced and they are tough as old boots. I'm talking finishing over alder and ash probably with a fancy grain filler/undercoat underneath. They still do offer nitro finishes but charge a premium for it.

 

I'm not 100% sure what automotive finishes are made from nowadays but if it works ok and the results are good go ahead and use it :)

 

Jim I like your spray booth. I've got one just like that ;)

  • Author

PB and Barry are right. Nitro Cellulose was used on cars in the 1950s (DuPont were one of the manufacturers) and Fender got hold of them to paint their guitars garish colours (Candy Apple Red, Lake Placid Blue etc), then Gibson used TV yellow and the clear coat stuff on some of their guitars. The finish gradually cracks over time and some Les Pauls from around 1958/1959 exchange hands for hundreds of thousands, if not millions of dollars now. Not because they were finished with nitro but it is a contributing factor. So Fender, along with other guitar makers, gradually changed over to polyurethane and acrylic finishes as paint technology advanced and they are tough as old boots. I'm talking finishing over alder and ash probably with a fancy grain filler/undercoat underneath. They still do offer nitro finishes but charge a premium for it.

 

I'm not 100% sure what automotive finishes are made from nowadays but if it works ok and the results are good go ahead and use it :)

 

Jim I like your spray booth. I've got one just like that ;)

I actually do have a spray booth 9' x 8' x 6' deep but this door was so heavy to handle I figured I would just spray it outside.  Besides, I had to spray the sidelight and arch top so I figured what the heck.

 

Jim

  • Author

31218c5a-3045-40e6-b9c7-c3c0aaf28a1f_zps

 

Here is the other part of the paint job.  I believe it was previously done with Sherwin Williams catalytic lacquer.  It was a tremendous job getting ready to refinish.

  • Author

Around here that barely qualifies as an exterior door. If you had a premature finish failure it was the installer not the finish.

 The door was a temporary one inserted to keep my wife happy.  This was the real one--solid cherry, 3'x8'.

5a201743-b994-4cb0-98a7-19a6c6ab88f2_zps

Jim

I realize its a temp. If your prior finish failed prematurely it was the installer not the finish. Your door is not exposed to the elements being tucked away in the alcove. Plain old conversion varnish done properly should last 25 years, lacquer with vinyl sealer about 20 and that's on a regular eve style home no alcove porch. If you had pealing or flaking from your old lacquer its moisture intrusion cased by improper application not the finish. There is really no need for epoxy or marine finishes on exterior doors.

  • Author

I agree, it was a crappy job by a professional painter or someone masquerading as one.. 

 

I put in a clear vertical grain doug fir six panel door in a house I used to own.  I put six coats of urethane, sanding in between.  it was not very well protected.  After 15 years it was still looking great.

 

I guess it was so much work to remove the old finish I didn't chance it.  I admit it was a disappointing result and I hope it will stay.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.