Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Color test

Featured Replies

I have this somewhere else too, but I wanted to cast a larger net :)

 

Here is a color test I did using amber shellac and amber transtint.

 

The top of the flame maple board is only the shellac.

 

Other woods are plain maple, bubinga and walnut.

 

I do like it, but it is a bit orange, I'll sand it down and see what happens. 

 

1187107_10201838676996779_787287745_n.jp

Maple is almost WYSIWYG. The color running down the side of a jar should be close to the first coat. Look at the fluid through the side that is the build color. These are both the same color started off as a weak tea and these are the builds. The darkest is three coats other is two. Start of real light then build your color. Your not coloring to these extremes so go a whole bunch lighter.

 

 

Are you looking for more brown? Try a base dye coat of something brown like a weak transnt brown mahogany then amber shellac over it. Think the transtint is too yellow as a base.

The amber transtint is great under a brown stain. Warms thing up.

-Ace-

  • Author

Yes, more brown will be better. I'll mess with it today.

Your also going to get very different results putting the dye in your finish vs just using water or alcohol.  The pictures I post above was a very weak brown mahogany. 1cc to a quart of thinner with 1 oz lacquer.

  • Author

Here is my latest attempt. This is clear poly on top, and clear poly with very little amber transtint. 

 

1230022_620534534644569_1775605716_n.jpg

 

1173862_620534507977905_752162907_n.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.