Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Respirator Use - Question for Marc

Featured Replies

I was wondering what filters you used/are using to spray water borne finishes (episode 155). I am unsure what filters to use in my 3M 7502 respirator.

I contacted 3M and sent them the MSDS info. They told me that they could not recommend a particular filter set, as many of generals ingredients in the high performance finish are proprietary.

I have the 6001 organic vapour cartridge, as well as the p100 filters (2091), and they assemble, together with the adaptor (502).

Can you contact the vendor and see if they can recommend a 3M filter? Unless they say 3M filters are proprietary and cant help  :o

  • Author

When I contacted 3M yesterday, they were very helpful and knowledgable. I was dissapointed they couldn't make a recommendation for respirator filters. They informed me that I would certainly need particulate protection and vapour protection. Unfortunately, they could not give me a specific filter due to the proprietary nature of a large percentage of the general finishes material.

So today I contacted general finishes, and I was surprised by the information I was given. The customer service rep told me first that any regular hardware store paper mask would be fine. I asked a bit more about this, and he told that was all the people at general use when spraying. i asked some more specific questions about vapours, and he told me I could use an organic vapour cartridge and not worry about any other filters (this is not correct, as the organic vapour cartridge does not block particulates). After I mentioned this, he said I could add a cloth over the vapour cartridge. I even spoke to a chemist from general, who did not seem very confident in his respirator recommendations.

I was a bit taken aback, as this is not wholly accurate information, and i thought general would have no issue knowing what protection should be used for their products. I. decided to go with a vapour cartridge from 3M (6001), attached to a p100 particulate filter (2091) - thanks Marc! I had to order some special clips to get them to marry together (502).

I love general finishes, and will continue to use them. I was happy that an actual person answered the phone on the first ring, and not some robot. I just thought they would be a bit more informed on the safety side of things.

  • Author

Osha requirement is your OV and n95. Just stick with that and you will live a long life.

Is this setup suitable for all spray finishes?

  • Author

Everything you will ever need to spray.

Thanks particle. As always, I appreciate the knowledge and experience you bring to this forum.

Everything you will ever need to spray.

 

That is of course, if you don't have to spray any catalyzed automotive finishes. With catalyzed urethanes, you have to use a fresh air system.

What your looking for is Isocyanates. Most if not all 2k urethane finishes is going to use an Isocyanate hardener. On the other hand you should not be spraying 2k finishes unless you have a commercial spray booth, protective clothing and a fresh air system. Part of the reason every manufacturer labels the product as "not for sale or public use". The government does not limit the sale to professionals but relies on resellers to police their products. 

Pretty much anything a hobby woodworker is going to buy off the shelf at major retailers and woodworking specific retailers is going to be safe for home use with only an OV and n95 combo. Once you start mixing your own concoctions is where you need to get an education. One of the big ones is guys thinning with Toluene its great but they develop respiratory problems down the road.

 

Just think, read the label or msds and dont play around with stuff you are unsure of.

  • Author

My pops is a big wig at OSHA, do you want me to forward your question to him?

Thanks, that would be great.

Response I got from my Dad

"Look on the can to see what is in the varnish.  There also may be directions on the can as to what PPE  (personal protective equipment) to use.  Normally an organic cartridge  respirator, gloves, eye protection.  Ask for a Material Safety Data Sheet for the varnish where you buy it from.  That will normally have the PPE requirements."

 

So basically whatever the MSDS says, which I think by law has to be provided when requested.  Hope that helps.

 

Edit I just saw you are in Canada, so you wont have the same rights/laws as US, but I am sure its close.

  • Author

Response I got from my Dad

"Look on the can to see what is in the varnish.  There also may be directions on the can as to what PPE  (personal protective equipment) to use.  Normally an organic cartridge  respirator, gloves, eye protection.  Ask for a Material Safety Data Sheet for the varnish where you buy it from.  That will normally have the PPE requirements."

 

So basically whatever the MSDS says, which I think by law has to be provided when requested.  Hope that helps.

 

Edit I just saw you are in Canada, so you wont have the same rights/laws as US, but I am sure its close.

Not much here for respitory protection info. I sent this data to 3m, but they told me it is mostly proprietary materials, and therefor they couldn't determine an appropriate filter.

http://www.generalfinishes.com/sites/default/files/file_downloads/MSDS-High-Performance-100509_0.pdf

  • Author

It's in section 8. That sentence means OV and N95

How come is doesn't specifically say that? It says something like "air purifying respirator". A person could think any respirator would do.

How come is doesn't specifically say that? It says something like "air purifying respirator". A person could think any respirator would do.

I agree they need to be more specific if they are going to market to the general public. Looking at all the cans of lacquer and solvent in my shop they all say the same thing.

All this stuff is dictated by their lawyers. If they recommend anything specific, they are liable if you get hurt by it. They can't be held liable if you make the decision what to use.

  • Author

All this stuff is dictated by their lawyers. If they recommend anything specific, they are liable if you get hurt by it. They can't be held liable if you make the decision what to use.

But isn't the whole point of the MSDS data sheet to provide specific information on the dangers of a particular product? It defeats its whole purpose if it leaves interpretation up to the reader.

But isn't the whole point of the MSDS data sheet to provide specific information on the dangers of a particular product? It defeats its whole purpose if it leaves interpretation up to the reader.

 

 

Keep in mind they sell this information.  My Dad's office has to pay thousands of dollars a year for publications of the regulations.  These can get nitty gritty. If product XYZ is present in ABC parts per million in the air, you need ABC protection meeting {Insert rating} rating.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.