Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting a better finish with my spokeshaves

Featured Replies

The last episode of WTO had me wondering... how can I get a better "finish" cut with my spokeshaves? I primarily use two spokeshaves - a Woodriver low angle spokeshave and a Veritas flat bottom spokeshave (I have a round bottom and concave shaves as well, and all three have A2 blades, but let's keep things simple for now).

 

The low angle spokeshave leaves a glass smooth cut - assuming it doesn't cause tear out or jam, or whatever. Not every cut, but with a little care, I can do it fairly consistently (again, barring grain direction changes or something going really wrong on that pass). On the other hand, my Veritas spokeshave cuts smoothly and consistently with almost no tearout except for really tough grain.

 

I sharpen both to 10,000 on water stones. The low angle I freehand, but it's probably 25-30 degrees. I sharpen the Veritas at 35 degrees.

 

Is that just the difference on the tools? Is there a trick to getting a cleaner surface on a "standard" spokeshave? I can always sand it out, but sometimes I want to keep the facets/handmade look.

If everything is sharp, and you are taking an appropriate thickness shaving, then the key element is to watch the direction of the grain. It changes frequently when working with curves. 

 

Regards from Perth

 

Derek

Not sure I follow what you're asking.  It sounds like you are getting good results from both shaves already??  The "standard" shave will make things a bit easier for you because it has a more plane like appearance with a sole in front of the blade to help control tearout.  However these will clog easily if you take to heavy a cut unless you open the mouth.  That will then allow for more tearout so I rarely set up these kinds of shaves for anything other than a light, finishing cut.  My low angle shave is the work horse that does the shaping work.  Even then I will set the blade (or the fence on the Veritas shave) at an angle so the blade takes a lighter cut on the left.  This adds a nuance for shaping that can allow you to quickly adjust if you run into grain issues.  Usually this will stop bad tearout in its tracks by quickly shifting to the lighter cut side.  Regardless if you keep a light fingertip grip on the shave and maintain the angle of engagement throughout you should continue to get a good cut.

  • Author

I meant to take photos last weekend to clarify my point. Shannon - assume I'm getting a smooth, tearout free cut with both spokeshaves. The difference is that my low angle spokeshave leaves a ready-to-finish quality cut. My Veritas shave leave a cut that, while smooth and tearout free, needs scraping or sanding afterwards to get to the same level of clarity.

 

I know that's super vague, but I can't think of a better way to illustrate it without a photo. I'll crap a scrap of jatoba or something tonight and take a couple pics.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.