Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Transtint Dye Question

Featured Replies

Hello All,

 

I was wondering if anyone has added transtint to shellac or a pre-cat lacquer to add color to your project that way. Here is my reason for asking.

 

We moved into a new house a little while ago and a lot of the trim and doors look like the attached picture (more red-brown than the yellow-brown in the pic), but some rooms just have a cheap white trim and doors. I want to start replacing the cheap stuff with trim that matches the rest of the house. I would like to spray the unfinished trim in large batches to cut down on time. Also, the trim is hemlock which can be prone to blotching. I was thinking that I could spray a coat or two of clear, then a coat of the color, then a coat of clear. I thought that might help keep from blotching. I do have some of that blotch control Marc recommends, but I wanted to cut out those steps. I'm open to changing my method though if someone has a better idea on how to quickly and easily match the trim. I'm still new to the stain/dye thing. I tend to keep wood natural in my projects, so any thoughts would be much appreciated. Thanks.

post-5847-0-30132900-1380577848_thumb.jp

==> I was wondering if anyone has added transtint to shellac or a pre-cat lacquer to add color to your project that way.

 

yes to both...  no problem toning --- I tend to do it with shellac...

I'd suggest you either get a lot of practice or just go down to a real finish supplier like sherwin Williams or Rodda and buy a spray stain matched to your color. Spray stains dont have the blotching issues that you are going to have with a hand applied stain.

  • Author

When you say "spray stain", I'm guessing it's something formulated for my HVLP?  Also, what are the pitfalls with transtint in shellac that would require me to get a lot of practice? Just curious since I've never tried it before. Sorry to bombard you with questions, but why would the spray stain not have blotching issues? Thanks for your help.

When you say "spray stain", I'm guessing it's something formulated for my HVLP?  Also, what are the pitfalls with transtint in shellac that would require me to get a lot of practice? Just curious since I've never tried it before. Sorry to bombard you with questions, but why would the spray stain not have blotching issues? Thanks for your help.

Solvent spray stains spray real even and dry fast so there is no blotching. Yes you can use your hvlp but the better the gun the better. With TT in shellac or lacquer it takes practice to not end up with a muddy finish. With lots of millwork its tougher to get the same tone over the whole job. So much easier to shoot an equalizer stain then tone with lacquer.

==> With TT in shellac or lacquer it takes practice to not end up with a muddy finish

 

that's a good point...  it took me a while to get handy with toning...

  • Author

Good to know, thanks. I did call SW and inquired about a spray stain. I don't know if it's just my local store, but they always seem to either not understand or say that I can't do that. I asked about a matching a spray stain to that color, and they didn't seem to think they could do that. I told them I'd be using an HVLP Earlex system, but they were telling me that's not the way to apply stain. I did explain what I was trying to accomplish, but that didn't really affect the outcome of our conversation. Anyone know more detail on the brand or what-have-you of spray stain I should be after? Just trying to get some more details so maybe I can help them out a bit. I do think I'll try the spray stain first.

Good to know, thanks. I did call SW and inquired about a spray stain. I don't know if it's just my local store, but they always seem to either not understand or say that I can't do that. I asked about a matching a spray stain to that color, and they didn't seem to think they could do that. I told them I'd be using an HVLP Earlex system, but they were telling me that's not the way to apply stain. I did explain what I was trying to accomplish, but that didn't really affect the outcome of our conversation. Anyone know more detail on the brand or what-have-you of spray stain I should be after? Just trying to get some more details so maybe I can help them out a bit. I do think I'll try the spray stain first.

The problem your running into is your store caters to painters and they dont understand their own products. You need to find a SW professional store. Rodda usually has better employee training. Their valspar grain tone base is the one I use daily it can be tinted pretty much any shade. You can also use their zenith if you want a WB. BUT with any paint store you will find that not all employees can do the mixing. I cant buy stain or anything on weekends because the weekend employees dont know what they are doing.

==> painters and they dont understand their own products

 

That's one issue...  There's two others that impact my accessibility to specific finishes...

 

 

There's only one paint store within a 40 minute drive...  There's a BORG about 45 minutes away, but I really try to avoid the place...

The local guy is a Benjamin Moore dealer, his rebate-level is based on carrying their products exclusively...  So my access to GF, SW, etc requires a much longer drive...

 

On the flip side, the main guy is very knowledgeable and works hard to find substitutes...  As PB points-out, the rest of the staff may be friendly, but they really don't know much...

What you need to know is that a spray stain is essentially a thinned out wiping stain. So any of the SW products that you can spray on and wipe back can be thinned 5:1 with naphtha to make a good spray stain even 3:1 toluene will work but will streak a little if your not careful.

That said I dont think I would try tinting or spraying a spray stain with an earlex gun. You have no air control and the turbine gun combo will not atomize well. It might be fine on narrow trim but im not sure I would try it on larger surfaces like doors.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.