Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Heat tolerant finish

Featured Replies

Good evening all, this is the first question I have for you experts, and it probably will be the last. I am a hobbyist woodworker and so do not have easy access to some of the more specialized tools and supplies that you may recommend. 

 

About a week ago I turned a mug on my lathe and was wondering about what to finish it with as I intend it to be used for such as coffee, tea, hot chocolate and such. I am less than certain of the heat tolerance of what I have right now, a water borne poly, and do not have much else readily available. What do you more knowledgeable gentlemen, and gentlewomen if you're out there, recommend I use? And any special things I should know about the application of such?

First and last question? That's a bit strange, but I'll bite. I hope that you reconsider and stick around and ask more questions and contribute to the community. 

 

To your question, have you considered just finishing it with cyanoacrylate glue? Pretty hard and durable finish and should be food safe when dry. Many turners use it for several of their pieces. I don't know how well it would stand up to heating and cooling, like microwaving though. You may want to do some test pieces to determine this.

Another finish to consider is salad bowl finish. Its made by several manufacturers.

 

Hope this helps.

+1 on the CA glue finish. You would need a perfectly sealed surface on the inside of a wooden drinking vessel. I recommend using the thin stuff, and flooding the surface, repeated on 2 or 3 coats. The thicker, brush-on CA glue leaves horrible brush marks, and doesn't seem to soak in as well.

  • Author

Thanks for the suggestion, but where would I find such in any quantity for a decent price? As for this being my first and last question, I already know most of what I need to know of the basics, and you all know better than I do for the input on other peoples questions. I hope you don;t find that rude or anything.

Not rude, just narrow minded in a way. There is a plethora of information on these blogs, tips, tricks, etc. that one would never think of by themselves in a million years. Stick around and read some of the discussions. You may learn something that is basic that you didn't know. As for being more advanced, some of the folks around here could probably teach woodworking and quite a few are doing ww at a pro. level.

 

As to your question of sourcing Cyano. glue, it really depends on where in the world you are. If you are in the UK, browse the internet and you should be able to find a mail order that supplies your neck of the woods for a reasonable price. Here is a 16 o.z. container of it on Amazon.

 

Hope that helps you.

  • Author

That's nowhere near as expensive as I was thinking it would be from my, admittedly quick, Google on cyanoacrylate as a wood finish, so I guess I could probably do that. Now it's a question of how much do I need, but that's not one you can really answer well, and I can only figure it by getting an X oz bottle and finding that I needed Y ozs . I might be back if I have another question for you guys, but you undoubtedly know better than I on many things so it is unlikely that I will not have anything to add that has not already been suggested/said or tried. But thanks for your help anyway.

Well come back and share your experience with the glue, post a pic of the finished product if you would as well.

Well come back and share your experience with the glue, post a pic of the finished product if you would as well.

 

+1.  I'm of little contribution myself but they haven't kicked me out yet.  Besides, Duck gets lonely & needs more turners to BS with.

 

Best of luck with the CA finish.  I'd agree that it's probably your best bet (well, maybe 2nd best after a stainless steel 'finish' ;) ) but I just loathe working with the stuff.

You probably won't require as much CA as you think. That stuff goes a long way. I used less than 1/2 oz. to finish 3 or 4 wooden guitar picks and half a dozen or so wooden finger rings, and a few assorted other jewelry items. Of course, the porosity of the wood makes a difference, but the glue still covers quite well.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.