chrisphr Posted October 20, 2013 Report Posted October 20, 2013 For ripping I know you put the feather board in front of the blade. If you are cutting a dado is it safe to put the feather board parallel with the blade? Seems like a good position for it as long as it is safe... Thanks! Quote
ColinF Posted October 20, 2013 Report Posted October 20, 2013 Should be safe since there's not really anyway to pinch the board against the blade, I can't imagine it would hurt anything because your fence is keeping the board from being pushed into the blade. 1 Quote
PeteJr Posted October 21, 2013 Report Posted October 21, 2013 For dado cuts I use a feather board to put downward pressure on the work piece to keep it in contact with the table. I set this up directly above the blade. I also use a feather board to keep the work piece up against the fence. I personally like the Mag Switch Vertical Featherboard Attachment with Risers. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.