JoshC1501 Posted October 21, 2013 Report Posted October 21, 2013 http://www.grizzly.com/products/Planer-Jointer-Blade-Hone/D1123 Anybody use one of these or similar? How do they work, blades are not that expensive so usually just replace them, but thought it might be nice to get a little more time out of them before changing. Ordered some blades this morning and I saw these, which got me thinking, Do you think it would work on disposable blades in the Dewalt lunch box planers. Quote
T-astragal Posted October 22, 2013 Report Posted October 22, 2013 Gimmick. Find a legit tool grinding service. There is no way to grind out chips and keep it straight without some serious equipment. The hone might slightly improve the edge and it might just round it off. Dull planer knives must be ground before honing. Stay away from low end shops that sharpen lawnmower blades and scissors. The service I use can keep 12" jointer blades within 1/1000th and also replaces carbide tips on saw blades when chipped. Steve Quote
wdwerker Posted October 22, 2013 Report Posted October 22, 2013 I have a fairly expensive jig for my Tormec wet sharpening wheel that sharpens my planer and joiner knives extremely sharp! You have to remove the blades and it does take a good bit of time but the results are better than my sharpening service can do. That little hone is just going to do a slight touch up but not really sharpen the blade. 1 Quote
T-astragal Posted October 22, 2013 Report Posted October 22, 2013 How long does it take to get a 1/16" groove out of a knive? I know you can get them sharp, are they straight? I've never used a tormek. Steve Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.