Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

30+" wide crosscuts on a benchtop saw?

Featured Replies

Why not! My contractor saw is awaiting pulleys and a new belt to tame the vibration. God, I hope that works otherwise I wasted a bunch of time and money not only on the belt/pulleys but on building a saw station... we'll see.

 

My benchtop saw is a ryobi bt3100 similar to some craftsman line saws. The rails are extruded aluminum, with channels in the underside and rear faces that accept a flat oblong rectangular metal plate that is threaded to accept a stud. The saw had the option of converting to a wide kit by using this plate to join two rails together to allow crosscutting wide panels.

 

My woodworking marathon day started with the need to breakdown some panels for the cabinets I am building, but the saw didn't have the capacity. I also didn't have the special plates on hand, so the day actually started with some welding. The next picture shows the setup. Not the most stable nor accurate, there is some flex in the rails since they are not supported completely and that causes the fence to not lockdown accurately. I ended up recutting the panels several times in steps to get them within a tolerance to build cabinets. Time consuming.... can't wait to be set up to work properly!

 

IMG_20131025_102618_zps3eca447a.jpg

 

 

 

d92e384b-73e6-44b9-a151-e33d9c4a0c43_zps

 

 

IMG_20131025_110259_zps8f46e04b.jpg

 

 

Parts of 4 cabinets milled up with joinery cut.

 

 

 

IMG_20131025_181138_zps04484c7f.jpg

 

 

 

 

The sun setting on a good day's work!

 

 

 

IMG_20131025_181151_zps832e566b.jpg

Awesome ingenuity!  Before I opened the thread, I was concerned I'd see a fence board clamped to the wide stock and you flipping the benchtop tablesaw up-side down against it...

Awesome ingenuity!  Before I opened the thread, I was concerned I'd see a fence board clamped to the wide stock and you flipping the benchtop tablesaw up-side down against it...

lb

My thoughts were similar. Congrats on the completed work :) there is nothing better than fixing a tool and completing your work in the same day.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.