Recommended Posts

Posted

This November I will have my ninth wedding anniversary. Since we got married we have had the same round less than three feet across dining table. $100 dollars from Target. For a couple of years my wife has been asking me to do something, make it, buy it, steal it, anything. This is because we have four kids and they like to eat too.

 

Long story short, she found a site called Ana White and there is a set of plans she fancied. I told her okay I would do it because I didn't want to spend what people want on a dining table. Also, we live in an apartment so I need the dimensions more customizable.

 

http://ana-white.com/2012/11/plans/farmhouse-table-updated-pocket-hole-plans

 

3154817541_1352743260.jpeg

 

I picked up construction grade D. Fir at a local Ganahl Lumber for $72 and change. Nothing fancy, but affordable. We are going for a weathered finish but not too dull. Finding examples is horrible. But this is the closest we can find to what we want the end look to be.

 

DSC_5772-003.jpg

 

After talking to MikeM, Beamer, Basshunter, and a few others in live chat, I have decided to do away with pocket screws and joint and glue this thing up to be sturdy. I will be trying to do a mortise and tenon for the aprons and bread board ends. I am new and I don't have many of the necessary tools for making a table top easily. So, I will be using my router to do some of the beefy jobs. Beamer, MikeM, and youtube helped me understand ways I can joint the edges without a jointer. Awesome.

 

In this Project Journal I will be posting questions and my attempts at making some of the things I need for this project overall. One of those was creating a router table. I did that today. I had some MDF and at Basshunter's (Live Chat) and emmrys', direction I made a router table and bought a Harbor Freight special portable workbench. On sale for a wopping $20. I only bought one because it looked terrible in the store.

 

2013-11-16194318_zpsc094ee07.jpg

 

2013-11-16194310_zpsd54cb0c6.jpg

 

The router table is 24"x36". I used some straight metal bar stock, clamps and a skil saw. Still square. Also, I was aiming for 24" and had to account for placement of the blade compared to the base. I measured and started the cut, oops I had clamps that blocked the motor. I dipped the circular saw in past the clamps and got as much as I could. Then I removed the clamps. I inserted the blade into the cut, with the motor facing away from the clamps, put my bar stock against the base and squared up both ends, clamped and cut. Spot on 24". Amazing because any time I try this stuff I fail at hitting dimensions.

 

Hopefully, tomorrow I will A) Buy another portable workbench for more stability and easy clamping B) Joint a 2x4 for a fence on the new table.

 

There is probably more I should say but I am tired. Thanks for viewing.

  • Like 1
Posted

Looks like you have the right idea!  The only advice I would give is to buy some extra stock so that you can do test cuts and make mistakes.  But if you are careful and take things slow, and figure out and test a strategy for each cut, you will end up with a beautiful table that will be in your family for generations.

 

Welcome to the forum!

Posted

The finish on that sample picture looks like a torch was waved over the wood and then it was brushed with a wire brush and maybe lightly sanded. An oil or varnish finish would go over that.

Posted

Thanks Beechwood. I plan to take it relatively slow. But since I am new to this I will have to keep checking myself. Newbies like to jump to the end result. :)

 

Hey wdwerker, thanks for the info on that. I will use my cut offs, not jeans, to test different ways of doing that. Would a map gas torch work for that? I believe we have that at my work. But anything bigger than that I wouldn't have available. 

 

Again thanks for the help guys.

 

I bought the second portable workbench. I began planing the 2x4 with my No. 4 plane. I only have that and a blocking plane at the moment. It is taking longer than I wanted to spend on making the fence, but if the fence is shoddy so will my work.

Posted

Back in 8th grade shop class we used small torches like this to get the effect your are looking for. 

 

http://www.lowes.com/ProductDisplay?partNumber=148722-13877-334750&langId=-1&storeId=10151&productId=4640199&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

 

There are also all kinds of homemade recipes on the internet for getting that rustic look involving tea, coffee, dirt, you name it. 

 

I think that table might be responsible for sucking more people into woodworking than any other project out there on the internet.  The ladies love their farmhouse tables and the men that can build them :) 

Posted

Yes a mapp gas torch will work. Play it back and forth constantly moving over an area. Not too close , maybe a few inches away. Practice on the scraps and then the underside of your table, it takes patience to do a large area. I do work like this outside and keep a bucket of water and some wet rags handy, you will get too close and catch the wood on fire ! A wire brush and some fine sandpaper will even things out.

My torch is one of the pull the trigger instant ignition ones from Lowes. It does not need to be running full blast !post-6363-0-81302400-1384800039_thumb.jp

The client wanted the sign rustic so we beat it up before we torched it. Sanded the metal and then heated it until it changed colors.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 69 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined