Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

finishing with polyurethane

Featured Replies

I am going to use 3 coats of either polycrylic or polyurethane over dewaxed shellac. I will end up with a semi gloss look. I have been told that the best outcome I can get is if I use Gloss on the first two coats then use the semi-gloss on the final coat. I was told it will give me  the cleanest or clearest look when I am dione. I asked someone at minwax his opinion and he agreed, I asked someone at Zinsser (they make Rust-oleum polyurethane's)  and he disagreed with this. Does  anyone out there have an opinion? Does anyone do this when they want to end with a semi-gloss or satin sheen? Please let me know what you think.  Thanks  Marty

Just remember that the last coat determines the sheen. If you use a satin sheen for multiply coats, eventually the finish will apply floggy or blurry. So that's why they suggest using a gloss finish to build up coats and then satin.

But in these case, simi-gloss will be fine on all three coats. There's no need to purchase another sheen for no apprant reason. Your finish will be crystal clear.

If you use compatible products you should have no problem. This has even been suggested for fine tuning sheen by applying the first coat of a mid grade semi without stirring since the dulling agents settle to the bottom. This can leave you with a slightly duller sheen than semi.

If your laying down a standard 3 - 5 mil finish you will not be able to tell the difference. If you are doing a real thick finish like on a wood instrument then you may be able to tell. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.