bester Posted December 27, 2013 Report Posted December 27, 2013 I was recently given a older Porter Cable model 555 plate joiner. The blade needs to be sharpened but I am having difficulty getting the tool apart to remove the blade. The newer models have screws in the bottom plate. I have removed the stops that hold the blade assembly and handle in but I'm not sure how to move the sizing rod on the right side of the machine so I can slide out the part of the tool with the blade assembly. I don't have a manual for the tool and I am hoping one of you guys have owned one and can talk me through it so I don't damage the machine. Thanks for any help. Quote
Tpt life Posted December 27, 2013 Report Posted December 27, 2013 http://www.ereplacementparts.com/porter-cable-555-type-plate-joiner-parts-c-129_1899_14536.html This help? Quote
bester Posted December 27, 2013 Author Report Posted December 27, 2013 a little, Im hoping someone who has owned the tool can give me a little guidance, Afraid Im going to break something. LOL Quote
Tpt life Posted December 27, 2013 Report Posted December 27, 2013 Below the diagram was a link to an article with pics. Did you catch that? Quote
bester Posted December 27, 2013 Author Report Posted December 27, 2013 Yep. Its an older model than that one. It doesn't have the screws in the bottom Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.