Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Veritas Plow Plane - Can't get tongue blade to work.

Featured Replies

I have the Vertitas plow plane, along with the wide-blade conversion kit. I have spent a lot of time trying to figure out how to use the 1/4 tongue blade. 

 
I see that the instructions say that for the 1/4 tongue blade the "only possible depth setting is 1/4". In the attached close-up photo, the blade is adjusted for a 1/4 inch depth. However, the integral depth stop interferes with the body of the plane. I cannot retract the blade any further than shown, and the blade is sticking out way past the skate.
 
I don't understand what I am doing wrong. I have been able to install the wide blades without any issues, but this integral depth stop doesn't seem to fit.
 
Can anyone explain what I need to do? Am I missing a step in the setup?

post-14451-0-87757200-1388894867_thumb.j

The depth stop should slide toward the skate. This will make room for the blade to be retracted properly. You should only have a minimal amount of blade protruding beyond the skate.

 

To clarify, the depth stop on a tongue blade is the adjustable piece on the blade with the screw, not the regular depth stop as used with a normal grooving blade.

  • Author

Mel, I understand that. But then I wouldn't ever be able to set the depth stop to 1/4 inch to create my 1/4 inch tongue. According to the instructions, the depth stop on the 1/4 tongue blade should be capable of that. 

Mel, I understand that. But then I wouldn't ever be able to set the depth stop to 1/4 inch to create my 1/4 inch tongue. According to the instructions, the depth stop on the 1/4 tongue blade should be capable of that. 

 

The integral depth stop on the blade is used instead of the regular depth stop. Yours looks like it's about an 3/4 or an inch away from the end of the blade. Adjust the integral stop on the blade with a ruler. The edge of the blade to the bottom of the integral depth stop should be 1/4". 

Awesome Mel, that video was the ticket!

Awesome Mel, that video was the ticket!

 

Excellent! I'm glad you liked it!

  • Author

I was measuring the integral depth stop as I show in this photo. This is wrong. I thought that matched the instructions in the attached drawing.

 

I figured out now how to do it. Instead of measuring the depth against the bevel angle, I need to measure while accounting for the angle that the blade is bedded in the plane.

 

Mel, I don't know if that is what you meant. When I read your statement, I thought you just meant to measure the straight distance along the blade, without accounting for the angle like in the attached drawing.

 

 

 

post-14451-0-00295500-1388898981_thumb.j

post-14451-0-03456700-1388898984_thumb.j

Yep! Measure it how it sits in the plane. Meaning from the flat part of the bevel to the start of the integral depth stop. Like the picture. :)

 

Glad it worked out!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.