Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collection @ the Router Fence

Featured Replies

I built a router table/fence some years back and I'm finally upgrading the 2 1/2" DC.  Getting 4" into the cabinet was easy but I'm looking for some ideas on how to mount the 4" on the fence.  My fence is great so I don't want to mess with it too much.  Any thoughts?

 

post-14962-0-90735900-1389064401_thumb.jpost-14962-0-36317700-1389064407_thumb.j   

Use the same flange you did on the case. Build a triangular box with the flange on top, triangular sides and notch the edges to fit the back of your fence. A partial bottom might be needed. I would cut a "u " shape to fit around any bits that might be recessed into the fence.

Consider something like this: http://www.homedepot.com/p/NDS-2-in-x-3-in-x-4-in-Styrene-Offset-Down-Spout-Adapter-904/100377412#

 

It's a downspout adapter that has a rectangular 2x3 opening on one end and a 4" round on the other. I saw "Stumpy nubs" use one on a drill press table on Blue Collar Woodworking and immediately thought "router fence" when I saw it.

 

I have no experience with it personally, but it might be worth taking a look at.

Personally, I have not found the need for 4" at the fence. I just use 2 1/2" and it seems to be fine. The chips and dust from a router bit are not going to clog like a jointer. I have 6" to my router box and just run a 2 1/2" from that box to the fence or clamp it close by for freehand work.

BRuce

  • Author

Thanks for the suggestions.  I wound up going with the downspout adapter.  The 4" end is actually 4 1/4".  Luckily I had an rubber coupler for 3" to 3" laying around.  The coupler fits snugly inside the 4 1/4" end of the downspout adapter so that worked out well - nice thing is I can easily remove for dust collection with freehand work.  I used a shim in the photo to hold the setup to the fence....will prob add screws to secure it later.  It worked out...although Steve's suggestion would have been far more ascetically pleasing.   :)

 

This should be a big improvement as I had 2 1/2" inch to both the cabinet and fence. 

 

 

post-14962-0-67481800-1389108976_thumb.j

post-14962-0-43514900-1389108991_thumb.j

post-14962-0-61888300-1389109038_thumb.j

post-14962-0-97148800-1389109058_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.