Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Best finish for oak entertainment center

Featured Replies

My father built a all red oak entertainment center.  We plan on staining it with Minwax Dark Walnut to match the kitchen cabinets.  When my house was built three years ago, the painter used Polycrilic over the cabinets because he felt that polyurethane would yellow with cooking etc..

 

Im wondering what finish I should put over this entertainment center to protect it, but also I don't want it to yellow over time. 

 

Ive had good luck with Helmsmann Spar Urethane thinned with mineral spirits at 50%.  I used this over my mahogonay exterior front doors and wiped it on using 5-6 coats. Im not sure this would be good for a interior piece because I think I read Helmsmann stays somewhat soft and pliable?

 

Any advice on finishes would be very very helpful.

 

thanks.

  • Author

I understand that.

I guess I should have added that I was looking for something that is easy to apply. I found the urethane and mineral spirits mix was very easy to wipe on with a mf cloth.

Is general finished the way to go?

  • Author

I looked at general finishes High performance and polyacrilic.  Both look promising. 

 

I noticed the main difference in the two is the high performance having a UV inhibitor which doesn't really concern me because this is a interior piece of furniture.  Im wondering what the best way to apply the Polyacrylic to the piece?  I saw you could use a paint pad applicator also.  That seems like it would be very easy to use.  any advice?

I would just use minwax and a high quality brush or foam brush its on par with GF stuff. The only time I would not suggest minwax is when it is being tinted as it does not play well with dyes.

  • Author

gotcha.

 

should I use regular polyurethane or water based polycrilic?  Im assuming I can thin the oil based poly with mineral spirits and wipe it on just like the spar urethane I used on my door? 

gotcha.

 

should I use regular polyurethane or water based polycrilic?  Im assuming I can thin the oil based poly with mineral spirits and wipe it on just like the spar urethane I used on my door? 

 

The Oil you can turn into a wipe on. The water you will have to brush but it won't yellow, just depends on what you want. Try a pint of WB you may like it.

  • 2 weeks later...

I'm pretty sure the spar will yellow more over time. To begin with, spar is an amber oil finish and you don't want that correct? Use what the painter used and call it done. Polycrylic.  :) 

 

-Ace-

  • 2 weeks later...
  • Author

polycrilic a little harder to work with? as far as brushing goes?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.