Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Would you rip through this?

Featured Replies

I need some additional width on another piece of Bubinga.  Would you risk rip-cutting through the center of this overgrowth (if that's what it is) and jointing it to another piece? 

post-14962-0-84497800-1389887094_thumb.j

post-14962-0-86379300-1389887096_thumb.j

Overgrowth?  Not sure what you mean.

 

If you're asking if you should make a crosscut and join two pieces back together end grain to end grain, the answer is no.

I was confused by this as well.

When you cross-cut as a rule you are cutting perpendicular to the grain.

When you joint 2 boards as a rule you should joint them parallel to the grain.

If you're talking about ripping it and gluing back together to get rid of that wavy grain, I'd just ask why?  It's just grain.  Looks fine to me.  If it's really going to throw your eye off, I'd probably pick another board.  I avoid glue lines at any and all reasonable cost...after all, which is worse: that natural (and very slight) aberration, or a severe one when you join two boards back together, which never looks perfect?

  • Author

Crap sorry for being an idiot, I did mean rip.  I don't wan't to get rid of the grain.  For the size piece i need to extend the other board i'd have rip through the center of the wavy grain.  My concern is if I do that and glue it to the other piece could i encounter issues in the future?   The grain is very tight.

 

Woodsap - you "nailed it"... thanks for reading my mind lol!

Crap sorry for being an idiot, I did mean rip.  I don't wan't to get rid of the grain.  For the size piece i need to extend the other board i'd have rip through the center of the wavy grain.  My concern is if I do that and glue it to the other piece could i encounter issues in the future?   The grain is very tight.

 

Woodsap - you "nailed it"... thanks for reading my mind lol!

 

I need some additional width on another piece of Bubinga.  Would you risk rip-cutting through the center of this overgrowth (if that's what it is) and jointing it to another piece? 

 

Don't apologize, you clearly said rip.

  • Author

Don't apologize, you clearly said rip.

Thanks RP but I wrote cross-cut in my initial post.  I changed it so I didn't look so dumb  :).

 

At any rate, I cut right through the center of the wavy grain without any issue. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.