lighthearted Posted January 26, 2014 Report Posted January 26, 2014 I own a Powermatic 60HH 8" Jointer and there is a little black insert in the fence that the manual calls a "Non-Mar Insert". Does anyone know what the purpose of this is? It is simply a small piece of plastic and recently gave me an issue, as it was not sitting flush with the fence and small pieces were getting snagged as I jointed them. I took it apart and adjusted it, but it was a PIA and for the life of me could not figure out what purpose it served. Anyone? Quote
dwacker Posted January 26, 2014 Report Posted January 26, 2014 The smaller jointer have a non supported fence and drag across the table. The table supports the fence and scratches the table. The insert is supposed to prevent table damage. Quote
Freddie Posted January 27, 2014 Report Posted January 27, 2014 It also extends up onto the face so when the blade guard swings shut it hits the no marr insert Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.